Operation Manual

1-8 POWERSCAN D8590 User’s Manual
Select Protocol and Connect to Imager
RS-232 Option
• Select RS-232 and click the Show Connect Symbol button.
•Print the RS-232 Connect Mode symbol (also shown in the Install ESP step) and
decode it to ensure that you are in the correct communications mode. Keep the printed
symbol in a convenient place for future use.
• Click Next to return to the RS-232 dia
log.
• Configure RS-232 settings and COM port and click Connect
.
• When you are connected successfully, the CONNECTED message will appear in a
green box in the status bar at the bottom right of the screen.
If the connection attempt fails, enable a different communications port, check your port
connections, and try again.
You are now ready to configure your imager using ESP. Subsequent se
ctions provide
more detailed information about ESP’s configuration options.