Operation Manual

1-4 POWERSCAN D8590 User’s Manual
RS-232 Interface
RS-232 Interface
Note: Unlike USB, the RS-232 interface does not draw its power from the host computer.
RS-232 Configuration
Installation Steps for RS-232
1. Power-off the host.
2. Connect the 8-pin mini-DIN on the
cable to th
e POWERSCAN D8590.
3. Connect the 9-pin D-sub connector to
the
host com
puter’s serial port.
4. Connect the cable to the power supply.
5. Plug in the power supply and power-on
the host.
6. Start up a terminal program (such as
ESP ’s Terminal view or HyperTerminal)
and set to 57.6K baud, 8 data bits,
none parity, and 2 stop bits.
7. Read the Rese
t to RS-
232 Factory
Defaults symbol below.
Reset to RS-232
Factory Defaults
8. Read the Save Settings symbol.
Save
Settings
Test Symbol
(ABCDEFGHIJKLMNOP)
Item Description Part Number
1 POWERSCAN D8590 DPM Imager, RS-232 PD8590-DPM
3
Kit, RS-232, 8’ coiled, US power supply CAB-532-KUS
Kit, RS-232, 8’ coiled, EU power supply CAB-532-KEU
Kit, RS-232, 8’ coiled, UK power supply CAB-532-KUK
RS-232 Configuration