PowerScan® PD8530 Reference Manual
Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”).
CONTENTS GENERAL VIEW .......................................................................................... v COMPLIANCE.............................................................................................. v CE Compliance .............................................................................................vi FCC Compliance...........................................................................................vi Laser Safety...........................................................
3 3.1 3.2 3.3 3.4 INITIAL SETUP .......................................................................................... 12 RS-232 Interface Selection ......................................................................... 12 Wedge Interface Selection .......................................................................... 13 USB Interface Selection .............................................................................. 14 IBM USB ...............................................................
GENERAL VIEW Cable Connector LEDs POWERSCAN® PD8530 Reader COMPLIANCE Aiming System Imager Beam Output Window POWERSCAN® PD8530 Reader Product Labels v
CE COMPLIANCE WARNING This is a Class A product . In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use this equipment. This device complies with Part 15 of the FCC Rules.
Aiming System The PowerScan® PD8530 aiming system meets the requirements for laser safety. D F LA LUCE LASER È VISIBILE ALL'OCCHIO UMANO E VIENE EMESSA DALLA FINESTRA INDICATA NELLA FIGURA.
ITALIANO Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e si riferiscono all’uso corretto del terminale. NORMATIVE STANDARD PER LA SICUREZZA LASER Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data di produzione: CDRH 21 CFR 1040 e EN 60825-1. Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo o manutenzione.
NORMES DE SECURITE LASER Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de fabrication: CDRH 21 CFR 1040 et EN 60825-1. Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien. ATTENTION L'utilisation de procédures ou réglages différents de ceux donnés ici peut entraîner une dangereuse exposition à lumière laser visible. Le produit utilise une diode laser.
WEEE COMPLIANCE Waste Electrical and Electronic Equipment (WEEE) Statement English For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the website at www.scanning.datalogic.com. Italian Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web www.scanning.datalogic.com. French Pour toute information relative à l’élimination des déchets électroniques (WEEE), veuillez consulter le site Internet www.
POWER SUPPLY This device is intended to be supplied by a UL Listed or CSA Certified Power Unit marked "Class 2" or "LPS" output rated 5-30 V, minimum 0.75 A which supplies power directly to the scanner via the jack connector on the cable. PATENTS This product is covered by one or more of the following patents: Design Pat.: AU 310201; AU 310202; CN 693980; HK 0602013.5M001; HK 0602013.5M002; JP 1305693; KR 30-0460940. US Pat.
SERVICE AND SUPPORT Datalogic provides several services as well as technical support through its website. Log on to www.scanning.datalogic.com and click on the links indicated for further information including: PRODUCTS Search through the links to arrive at your product page where you can download specific Manuals and Software & Utilities including: - Datalogic Aladdin™ a multi-platform utility program that allows device configuration using a PC.
INTRODUCTION 1 1.1 INTRODUCTION POWERSCAN® PD8530 FAMILY DESCRIPTION The PowerScan® PD8530 Family Hand-Held Reader packs a lot of performance into an attractive, rugged, hand-held device. It operates in commercial and industrial environments as well as the front office. Omni-directional Operating To read a symbol or capture an image, you simply aim the reader and pull the trigger. Since PowerScan® PD8530 Family is a powerful omni-directional reader, the orientation of the symbol is not important.
POWERSCAN® PD8530 1.3 1.3.1 CONFIGURATION METHODS Reading Configuration Codes This manual can be used for complete setup and configuration. If you wish to change the default settings, you can configure the PowerScan® PD8530 reader by reading the programming code symbols in this manual. Configuration commands and their relative arguments are read individually using the symbols in this manual. See Appendix D. 1.3.
INTRODUCTION 1.4 CABLE CONNECTION A. Rubber gasket B. Plastic boot C. Cable spacer D. Cover E.
POWERSCAN® PD8530 Follow the given procedure for correct cable insertion: Align 3 2 5 1 6 Notch 4 7 Arrow Tab Slip the cover over the cable. Push the plastic boot into the rubber gasket. Take care that the tab on the plastic boot is aligned with the notch in the rubber gasket. Push the plastic boot and gasket into the handle. Ensure that the “Front” marking on the plastic boot is facing out, with the arrow pointing towards the front of the scanner.
USING POWERSCAN® PD8530 2 2.1 USING POWERSCAN® PD8530 AIMING SYSTEM The PowerScan® PD8530 reader uses an intelligent aiming system similar to those on cameras. By partially pulling the trigger, the aiming system indicates a field of view to be positioned over the code: Figure 1 - Aiming System When you pull the trigger completely a red beam illuminates the code. If the aiming system is centered and the entire symbology is within the aiming system, you will get a good read.
POWERSCAN® PD8530 The field of view indicated by the aiming system will be smaller when the PowerScan® PD8530 is closer to the code and larger when it is farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit. Symbologies with larger bars or elements (mil size) should be read farther from the unit. (See chapter 8 for further details). 2.2 NORMAL OPERATION PowerScan® PD8530 normally functions by capturing and decoding codes.
USING POWERSCAN® PD8530 You can use the aiming system to position the reader from the object (ensure the reader is about centered over the target). Adjust the distance at which you are holding the reader (see Figure 2). If the RS-232 interface has been selected, the image will be transferred to the host PC via XMODEM_1K protocol. Image capturing is not available in Wedge and USB Keyboard Emulation interfaces and is not compatible with Autoscanning nor when the Software trigger type is selected.
POWERSCAN® PD8530 2.3.2 Advanced Configuration Parameters By default, for all Image Presets, the window has its origin coordinates equal to zero, its width equal to 1280 pixels and its height to 1024 pixels. Brightness Adjustment is available in the range from –100% up to 100%, in steps of 1%. Positive values shift the luminance up so that the image will result brighter. Default value is 0%, meaning that no brightness adjustment is performed.
USING POWERSCAN® PD8530 undesired effect, the Autoscan Pattern Code is placed in the PowerScan® PD8530 reading area which prevents decoding. Using this code as the background, code reading takes place normally by presenting desired codes to be read over the Pattern Code. Between each code read, the Pattern Code must be presented to the reader. The Pattern Code can be printed from the file of the manual (Appendix D) available on the CD-ROM.
POWERSCAN® PD8530 2.6 DEFINING DATA FORMATTING The string of a decoded code to be sent to the host may be formatted as follows: defining simple data formatting (see page 43); defining advanced data formatting giving complete flexibility in changing the format of data (see par. 4.3). When both simple and advanced data formatting are selected the info is processed in the following order: 1. the string of the decoded code is processed according to the advanced formatting rules; 2.
USING POWERSCAN® PD8530 2.6.1 Concatenation It is possible to concatenate up to 4 different codes, set their length and enable the intercode delay between them (the intercode delay is set in the specific interface parameters, see page 28, 30 and 35). When enabling the delay one or more global headers and terminators are added to the decoded data.
POWERSCAN® PD8530 3 INITIAL SETUP This procedure allows setting up the reader to operate with the default settings. Whenever you need to change the default values refer to par. 4.2. 3.1 RS-232 INTERFACE SELECTION The PowerScan® PD8530 reader requires the RS-232 interface cable and the AC/DC power adapter to be connected. To install and configure your reader with the RS-232 interface, follow these instructions: 1.
INITIAL SETUP 3.2 WEDGE INTERFACE SELECTION The PowerScan® PD8530 reader requires the Wedge interface cable and the AC/DC power adapter to be connected. To install and configure your reader with the Wedge interface, follow these instructions: 1. Make all the PowerScan® PD8530 reader connections as shown in Figure 4: 1 2 Figure 4 – Reader Wedge Connections 2.
POWERSCAN® PD8530 4. Make all PC system connections as shown in Figure 5: 5. Power up your PC. Figure 5 – PC Wedge Connection CAUTION When not using the PowerScan® PD8530 reader remember to disconnect the Wedge interface from the PC before disconnecting the power cord. While using the PowerScan® PD8530 it is always necessary to use cables adopting an external power supply. NOTE 3.
INITIAL SETUP 1 2 Figure 6 – Reader USB Connections 2. Read the restore default parameter code below: Restore Default AMHKGPAOFNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJALECHGIK AKCBPJCJGIIJCMCFGPLCMMMNLK AEFBJLBGMHPKMOGNKKNDPDMGGK AAPHBAJIDGHPOJKEFPNCEACBHK AFKFBKNGLGMOMELLGOPCMJFKIK DDDDLDLLLDDLLLLDDDLDDLDLDL 3.
POWERSCAN® PD8530 5. Install the USB driver on your PC (the first time only) to complete the connection. For USB Bulk the relevant files and drivers must be installed from the CD-ROM. See the “DLBulkUSB User Guide” file provided on the CDROM for more information. For USB COM the relevant files and drivers must be installed from the USB Device Installation software which can be downloaded from the web site http://www.scanning.datalogic.com.
INITIAL SETUP 3.4 IBM USB To install and configure your reader with one of the USB interfaces, follow these instructions. 1. Make all the PowerScan® PD8530 reader connections as shown: 2.
POWERSCAN® PD8530 4 CONFIGURATION USING CODE SYMBOLS This section describes the programming method of using configuration code symbols to program your reader. By using the PowerScan® PD8530 reader to read/decode these special configuration symbols, you can configure, and obtain information from its system software. When you are reading configuration code symbols, carefully aim the PowerScan® PD8530 2D reader to avoid reading adjacent symbols.
CONFIGURATION USING CODE SYMBOLS 4.
POWERSCAN® PD8530 Data Format-Symbology Independent Parameters Code Identifier Custom Code Identifier Code Length *Header *Terminator Disabled Disabled Disabled No headers CR and LF terminators for RS-232, USB BULK, USB COM, USB Generic HID ENTER terminator for Wedge, USB Kbd Data Format-Symbology Dependent Parameters Symbology Specific Format Header Symbology Terminator Symbology Symbology Character Substitution Symbology Character Deletion Select All No headers No terminators No character to substitut
CONFIGURATION USING CODE SYMBOLS EAN/UPC Selection Add-On UPCE Expansion Enabled Disabled Disabled Code 39 Selection Code39 Full ASCII Code Length Check Minimum Length Maximum Length Start/Stop Character Enabled - no check digit Disabled Disabled 001 255 Disabled Code 32 Selection Disabled Interleaved 2 of 5 Selection Code Length Check Minimum Length Maximum Length Disabled Disabled 014 255 Codabar Selection Code Length Check Minimum Length Maximum Length Disabled Disabled 001 255 Code 128 Code12
POWERSCAN® PD8530 PDF417 Selection Option Micro PDF417 Enabled Macro PDF417 Buffered Mode Disabled GS1 DataBar™ Family GS1 DataBar Expanded GS1 DataBar Limited GS1 DataBar Omnidirectional GS1 DataBar Expanded Stacked GS1 DataBar Stacked Disabled Disabled Disabled Disabled Disabled Data Matrix Selection Rectangular Style Minimum Code Length Maximum Code Length Enabled - normal & inverted Enabled 0001 3600 QR Selection Enabled Postal Codes Selection Disabled Australian Table Selection N Table Max
CONFIGURATION USING CODE SYMBOLS Flash OFF Beeper Tone Beeper Volume Beeper Duration Reads per Cycle Scan Timeout User Defined Beeper Tone User Defined Beeper Volume User Defined Beeper Duration Codes per Scan Central Code Transmission 2 sec Tone 1 High volume 50 ms One read per cycle 5 sec Tone 1 High Volume 100 ms One code per scan Disabled Reading Parameters (continued) Order by Code Length Order by Code Symbology Autoscan Mode Autoscan Aiming System Autoscan Hardware Trigger Autoscan Illumination Sys
POWERSCAN® PD8530 4.2 CHANGING DEFAULT SETTINGS Once the reader is set up, you can change the default parameters to meet your application needs. Refer to the preceding paragraphs for initial configuration in order to set the default values and select the interface for your application. In this manual, the configuration parameters are divided into logical groups making it easy to find the desired function base on its reference group.
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration RS-232 AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL RS-232 INTERFACE BAUD RATE 1200 baud 2400 baud AODOBPHMHNGN
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration RS-232 AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL PARITY None Odd AODOCKHMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHM
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL RS-232 RX TIMEOUT RX Timeout AODKBPHMFNGNENEIEPANHOGOCK AHPNIJAMDKE
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL RS-232 FIFO Disabled Enabled AODKGKFOHNGNENEIEPANHOGOCK AHHPMJAMDKE
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL USB USB USB COM Emulation HANDSHAKE None XON/XOFF AOALGKHMHNGNENEIE
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL USB INTERCHARACTER DELAY Intercharacter Delay AOALBPHMHNGNENEIEPANHOG
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL USB USB Keyboard Emulation FIFO Disabled Enabled AOAPGKFOHNGNENEIEP
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration USB AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL KEYBOARD NATIONALITY This parameter default value is restored th
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration USB AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL KEYBOARD SPEED This parameter default value is restored through
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL WEDGE WEDGE INTERFACE CAPS LOCK Caps Lock Off Caps Lock On AOCOCOFO
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL WEDGE INTERCODE DELAY Intercode Delay AOCKFPHMDNGNENEIEPANHOGOCK AHPN
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL WEDGE AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL USA AOCOCOHMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALFHCGIK AKC
WEDGE Some ASCII characters may be missing as this depends on the type of keyboard: these are generally particular characters relative to the various national symbologies. In this case: The first 4 characters (Shift, Alt, Ctrl, and Backspace) can only be substituted with keys not used, or substituted with each other. Characters can be substituted with other single symbols (e.g. "SPACE") even if not included in the barcode set used.
WEDGE Acoustic Signals Four types of acoustic signals are associated with the following steps: 1. Enter keyboard setup 2. Exit keyboard setup 3. SHIFT, ALT, CTRL, BACKSPACE keys 4. Keyboard keys (SHIFT, ALT, CTRL, BACKSPACE excluded) These signals facilitate the selection of those characters requiring more than one key pressed simultaneously. Example The transmission of the "%" character implies two different steps: 1. Press the SHIFT key 2.
WEDGE EXTENDED HEADER/TERMINATOR KEYS For the WEDGE interface, the following extended keyboard values can also be configured. These values are restored through the Interface Selection code and not Restore Default.
WEDGE SET CUSTOM EXTENDED HEADER/TERMINATOR KEYS Set Extended Keys AOCOBLHMFNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJAKFAHEIK AKCBPJCJGIIJCMCEGJMDPHOPJK AEFBJLBGMHPKNMHNBGHNEDDEGK AAPHBAJJCBCBJNFHFHFBFPJNHK AFLFAOPHBFNMIOAIIIOEMAEJLK DLLLLLLDDDLLLLLDLDDDDLDLLL The extended Header/Terminator keys for Wedge Interface users can be customized by defining them through a simple keyboard setting procedure.
WEDGE If the first 4 KEYS (Shift, Alt, Ctrl, and Backspace) are not available on your keyboard, you can only substitute them with keys not used, or substitute them with each other. The reader signals the end of the procedure with 3 beeps indicating the keys have been registered.
WEDGE Acoustic Signals Four types of acoustic signals are associated with the following steps: 1. Enter keyboard setup 2. Exit keyboard setup 3. SHIFT, ALT, CTRL, BACKSPACE keys 4. Keyboard keys (SHIFT, ALT, CTRL, BACKSPACE excluded) These signals facilitate the selection of those characters requiring more than one key pressed simultaneously. Example The transmission of the "%" character implies two different steps: 1. Press the SHIFT key 2.
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL DATA FORMAT DATA FORMAT The Data Format parameters can be restored to
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL DATA FORMAT AIM Standard Code ID Datalogic Code ID AOCPCOHMHNGNENEI
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL DATA FORMAT HEADERS Disabled Enabled AOCLGKHMFNGNENEIEPANHOGOCK AHH
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration DATA FORMAT AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL Symbology Dependent Parameters The “Symbology Specific F
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL DATA FORMAT HEADERS Headers AOCPFPHMFNGNENEIEPANHOGOCK AHPNIJAMDKEO
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL DATA FORMAT SYMBOLOGY CHARACTER SUBSTITUTION Symbology Character Su
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL DATA FORMAT AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CHARACTER DELETION Character Deletion AOCLFPHMFNGNENEIE
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL DATA FORMAT Concatenation Options FIRST CONCATENATED CODE LENGTH Set
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL DATA FORMAT CONCATENATION WITH INTERCODE DELAY Disabled Enabled A
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL DATA FORMAT CONCATENATION RESULT CODE ID No Code Identifier Use Firs
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration CAMERA CONTROL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CAMERA CONTROL EXPOSURE MODE Automatic (Entire Image)
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL POWER SAVE POWER SAVE ILLUMINATION SYSTEM POWER 54 Illumination Sys
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CODE SELECTION Linear Symbologies CODE SELECTION Disable All Symbolog
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CODE SELECTION Linear Symbologies Linear Symbologies UPC/EAN/JAN FA
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration CODE SELECTION Linear Symbologies AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL Code 39 Full ASCII - Disabled Cod
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CODE SELECTION Linear Symbologies INTERLEAVED 2 OF 5 FAMILY Disabled
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration CODE SELECTION Linear Symbologies AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CODABAR FAMILY Disabled Enabled -
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration CODE SELECTION Linear Symbologies AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CODE 128 FAMILY Code 128 - Disable
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration CODE SELECTION Linear Symbologies AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL EAN 128 - Code Length Check Disabl
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CODE SELECTION Linear Symbologies Maximum Code Length APCLBLFOFNGNE
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CODE SELECTION 2D Symbologies 2D Symbologies PDF417 Disabled Enabl
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CODE SELECTION 2D Symbologies DATAMATRIX FAMILY Disabled Enabled AP
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration CODE SELECTION 2D Symbologies AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL POSTAL CODES FAMILY All Disabled Aust
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CODE SELECTION 2D Symbologies AUSTRALIAN TABLE SELECTION N Table C T
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration CODE SELECTION 2D Symbologies AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL Maxicode Mode 4 - Disabled Maxicode M
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration CODE SELECTION 2D Symbologies AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL COMPOSITE CODES Before enabling this
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration READING PARAMETERS AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL READING PARAMETERS TRIGGER MODE Trigger Level Tr
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration READING PARAMETERS AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL BEEPER TONE Tone 1 Tone 2 APDNCKHMHNGNENEIEPANH
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL READING PARAMETERS READS PER CYCLE One Read per Cycle Multiple Reads
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL READING PARAMETERS USER DEFINED BEEPER VOLUME Beeper OFF Low Volume
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL READING PARAMETERS Code Ordering and Selection CODES PER SCAN One C
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL READING PARAMETERS ORDER BY CODE SYMBOLOGY The following command is
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL READING PARAMETERS AUTOSCAN HARDWARE TRIGGER Disabled Enabled APCOC
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration CAPTURE IMAGE AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL CAPTURE IMAGE In order to capture an image, you should
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL ADVANCED IMAGE CAPTURE ADVANCED IMAGE CAPTURE Image Preset 1 Basic
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL ADVANCED IMAGE CAPTURE JPEG QUALITY FACTOR – PRESET 1 JPEG Quality Fa
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL ADVANCED IMAGE CAPTURE Decrease APCNCOHKFNGNENEIEPANHOGOCK AFPFKBIMDK
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL ADVANCED IMAGE CAPTURE Image Preset 2 Basic Configuration IMAGE FO
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL ADVANCED IMAGE CAPTURE Advanced Configuration BRIGHTNESS – PRESET 2
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration ADVANCED IMAGE CAPTURE AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL COLOR DEPTH – PRESET 2 2 Grey Levels* 16 Gre
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL ADVANCED IMAGE CAPTURE Image Preset 3 Basic Configuration IMAGE FO
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL ADVANCED IMAGE CAPTURE Advanced Configuration BRIGHTNESS – PRESET 3
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration ADVANCED IMAGE CAPTURE AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL COLOR DEPTH – PRESET 3 2 Grey Levels* 16 Gre
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL ADVANCED IMAGE CAPTURE Image Preset 4 Basic Configuration IMAGE FO
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL ADVANCED IMAGE CAPTURE Advanced Configuration BRIGHTNESS – PRESET 4
Enter Reader Configuration AMHKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCAFIK AKCBPJCJGIIJCMCEGOODCCEDJK AEFBJLBGMHPLNPGLABJHFIAEGK AAPHBAJICCBGBIAFNLNLLAINDK AFLFBPPCOIHKILNFFOCKOLJILK DLDDLDDLDDLLLLLDDDLDDLDLLL Exit and Save Reader Configuration ADVANCED IMAGE CAPTURE AMHKCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFEGFIK AKCBPJCJGIIJCMCEGLJKNEBJLK AEFBJLBGMHPLMIFPAFAIIBNHGK AAPHBAJIDGDHOJDKAICECIENBK AGLFBOMJMHLIGBPCKIGAGOEKLK DDLDLDDLLLDLLLLDDDDDDLDLDL COLOR DEPTH – PRESET 4 2 Grey Levels* 16 Gre
CONFIGURATION USING CODE SYMBOLS 4.3 ADVANCED DATA FORMAT Advanced data format has been designed to offer you complete flexibility in changing the format of barcode data before transmitting it to the host system.
POWERSCAN® PD8530 4.3.
CONFIGURATION USING CODE SYMBOLS STEP 2 FORMAT DEFINITION Method 1 - Extracting Information from Barcode Method 1 allows extracting one or more fields by position or by characters from the decoded barcode. These fields are sent to the host computer as data of the output message, while the characters not included in the formatting procedure will be deleted and not inserted in the output message.
POWERSCAN® PD8530 Example Method 1 Extracting Information from Barcode Decoded code: Formatting procedure: Add new string + Extract field by position + Add new string + Extract field by character + Add new string Add New String String character(s) End String Add ANGOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFCDGIK AKCBPJCJGIIJCMCEHJLONAJLLK AEFBJLBGMHPLMJGBFHKLALDGGK AAPHBAJJDECHGDKMOEDDMEBJBK AHLEBNKAODJIMPLGJNNKMCKJIK DDDLLLDDDLDLLLLDLDDDDLDLDL ANGOGIFKDNGNENEIEPANHOGOCK AHPNIBA
CONFIGURATION USING CODE SYMBOLS FIELD EXTRACTION BY CHARACTER a) Define Field Starting Character(s) Field Starting Character(s) AOCKHMFKFNGNENEIEPANHOGOCK AHJLJFGOPKEOFMHMLJALEDGHKK AOJDPBCJGIIJCMCEGNOJDNBPEK AIFBJLBGMHPLNIDFFINJEEAJOK AAPHBAJICCGOBPPLKMDJODJLBK AHLFALLKHHHKCDLGLEPOABEKIK DLDLDLLDLDDLLLLDDDLDDLDLLL b) Read the Hex value from the Hex/Numeric table identifying the starting character(s) of the field to be extracted. Valid values are in the range 00-7F.
POWERSCAN® PD8530 FIELD EXTRACTION BY POSITION a) Define Field Starting Position Field Starting Position AOBLHMFKFNGNENEIEPANHOGOCK AHJLJDHODKEOFMHMLJAKFAAEKK AOJDPBCJGIIJCMCFHLLMNMLLCK AIFBJLBGMHPKNODINAHHKIIIOK AAPHBAJJCEENANJPDPICKJMNDK AELFAOIHAAIMAJHDEOOCAELIJK DDLLDLLDLDLLLLLDLLLDDLDLDL b) Read a number corresponding to the field starting position.
CONFIGURATION USING CODE SYMBOLS ADD NEW STRING a) Define New String String Character(s) ANGOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFCDGIK AKCBPJCJGIIJCMCEHJLONAJLLK AEFBJLBGMHPLMJGBFHKLALDGGK AAPHBAJJDECHGDKMOEDDMEBJBK AHLEBNKAODJIMPLGJNNKMCKJIK DDDLLLDDDLDLLLLDLDDDDLDLDL b) Read the Hex value from the Hex/Numeric table identifying the character(s). Valid values are in the range 00-7F.
POWERSCAN® PD8530 Method 2 - Manipulating the Barcode Data Method 2 allows modifying the barcode data by means of one of the following procedures: String insertion; String deletion; String substitution; Field deletion. Once the data has been modified, it is sent to the host computer as data of the output message. Unlike Method 1 this method does not allow associating different procedures together. This means that each format definition corresponds to a single procedure.
CONFIGURATION USING CODE SYMBOLS STRING INSERTION To complete this procedure proceed as follows: Define Form at 1, 2, 3, 4 , o r 5 YES Add String? Add new String NO Insert String YES Add ne w String Add Add S tring ? A dd NO End Form at Definition Example Decoded code: Formatting procedure: Add new string + Insert String Add New String String character(s) End String Add ANGOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFCDGIK AKCBPJCJGIIJCMCEHJLONAJLLK AEFBJLBGMHPLMJGBFHKLALDGG
POWERSCAN® PD8530 String Insertion Procedure a) Insert String Insert String APCJHMFKFNGNENEIEPANHOGOCK AHJLJFGOPKEOFMHMLJAKFBEFKK AOJDPBCJGIIJCMCFGNNKPHPHEK AIFBJLBGMHPKMNFKECEKLIIKOK AAPHBAJJCHGNHBHGFNLIIFKNBK AGLFAPNMBCJCECKOAHGMMHGJIK DLLLDLLDLDDLLLLDDLLDDLDLLL b) Read the Hex value from the Hex/Numeric table identifying the characters to be inserted. Valid values are in the range 00-7F.
CONFIGURATION USING CODE SYMBOLS STRING DELETION To complete this procedure proceed as follows: Define Format 1, 2, 3, 4, or 5 Add String? YES Add new String NO Delete String Add Delete YES Add new String Add String? Add NO End Format Definition Example Decoded code: Formatting procedure: Delete First String + Delete Second String + Add New String.
POWERSCAN® PD8530 String Deletion Procedure a) Delete String Delete AMHLGLEKHNGNENEIEPANHOGOCK AHLNEBIMDKEOFMHMLJAKEDDEJK AKCBPJCJGIIJCMCEHKMCKLPJPK AEFBJLBGMHPLMMEILNAAMKFHGK AAPHBAJIDFHJHFNFIEAPKCANBK AFKFAIMEHLPACFEFIKDEGEPKLK DLDLLLLDDLLLLLLDDDLDDLDLDL b) (optional) Read the Hex value from the Hex/Numeric table identifying the string character(s) to be deleted. Valid values are in the range 00-7F.
CONFIGURATION USING CODE SYMBOLS STRING SUBSTITUTION To complete this procedure proceed as follows: Define Form at 1, 2, 3, 4 , o r 5 YES Add String? Add new String NO Substitute String YES Add new String Add Add String? Add NO End Form at De finition Example Decoded code: Formatting procedure: Add new string + String substitution + Add new string.
POWERSCAN® PD8530 String Substitution Procedure Define String to be Substituted a) Substitute String APAKHMFKFNGNENEIEPANHOGOCK AHJLJFGOPKEOFMHMLJAKEDHGKK AOJDPBCJGIIJCMCEGOLKBIGLCK AIFBJLBGMHPLNKFOPDLBPKNKOK AAPHBAJICGBMGPOCHHEBNAMFHK AHLFAKKFLHGOGEAFKMLMANFIKK DDLLDLLDLLDLLLLDLDLDDLDLLL b) Read the Hex value from the Hex/Numeric table identifying the characters of the string to be substituted. Valid values are in the range 00-7F.
CONFIGURATION USING CODE SYMBOLS FIELD DELETION To complete this procedure proceed as follows: Define Form at 1, 2, 3, 4, or 5 YES Ad d String? Add new String NO Delete Field Add Delete YES Ad d new String Ad d String? Add NO End Form at Definition Example Decoded code: Formatting procedure: Delete First Field + Delete Second Field + Add New String.
POWERSCAN® PD8530 Field Deletion Procedure a) Delete Field Delete AMHLGLEKHNGNENEIEPANHOGOCK AHHPEBIMDKEOFMHMLJALEAHEIK AKCBPJCJGIIJCMCEHILFPJABJK AEFBJLBGMHPKNIFAMGIDOBPFGK AAPHBAJIDBDPFCPCBLBBIHELFK AGLFAMKAJEOIKHFKIGKEMGNILK DDLLLLLDLLLLLLLDDLDDDLDLLL b) Read the code to enable the command deleting the field.
CONFIGURATION USING CODE SYMBOLS f) EITHER Add String Add AMHNGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCGEIK AKCBPJCJGIIJCMCEHKODEMDDPK AEFBJLBGMHPKMOBCLFFFACLGGK AAPHBAJIDBGAJHMKPCBLOPFBFK AHKEBMPDMCJKIFABFMGICEEIJK DLDLLLDDDLLLLLLDLLLDDLDLDL OR To add a new string of characters read the code and follow the procedure described on page 106; End Format Definition End Format Definition AOHPGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFDHEIK AKCBPJCJGIIJCMCEGPJNABHNLK AEFBJLBGMHPKMIGKBFNOFMEFGK AAPHBA
POWERSCAN® PD8530 ADD NEW STRING a) Define New String String Character ANGOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFCDGIK AKCBPJCJGIIJCMCEHJLONAJLLK AEFBJLBGMHPLMJGBFHKLALDGGK AAPHBAJJDECHGDKMOEDDMEBJBK AHLEBNKAODJIMPLGJNNKMCKJIK DDDLLLDDDLDLLLLDLDDDDLDLDL b) Read the Hex value from the Hex/Numeric table identifying the starting characters. Valid values are in the range 00-7F.
CONFIGURATION USING CODE SYMBOLS 4.3.2 Match Conditions By setting one or more of the following conditions it is possible to select the codes to be formatted. Follow the given steps to define the desired condition.
POWERSCAN® PD8530 AND/OR MATCH SYMBOLOGY Define Code Symbology Match Symbology AOCLFLFMFNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJAKEGBHIK AKCBPJCJGIIJCMCFGMKNOLCFJK AEFBJLBGMHPLMLHPOCDCLFDGGK AAPHBAJJCECGCJGBDFGBNLINBK AHKFAILPHFEMACFDFLIEKIPKLK DDDLLDLDDLDLLLLDDDLDDLDLLL 108 Read the above code and: 1. read a number in the range 1-5 corresponding to the desired format number; 2. set the number of the matching code symbologies in the range 0-4; 3.
CONFIGURATION USING CODE SYMBOLS 4.3.
POWERSCAN® PD8530 4.3.4 Mismatch Result The result of each format may be set in case the match conditions previously selected are not satisfied. Once the desired formats have been enabled and a code has been read, the results corresponding to each format will be concatenated together and transmitted in the output message. For this reason, it is strongly advised to set the mismatch result for each format.
REFERENCES 5 REFERENCES 5.1 RS-232 – USB COM 5.1.1 ACK/NACK Protocol The transmission protocol takes place between reader and Host. Once the reader has read a code, it emits a good read beep and passes its data to the Host. When ACK/NACK is disabled, there is no control from reader to Host transmission. When ACK/NACK is enabled, the Host sends an ACK character (06 HEX) in the case of good reception or the NACK character (15 HEX) requesting re-transmission, in the case of bad reception.
POWERSCAN® PD8530 5.2 5.2.1 USB KEYBOARD Keyboard Speed This parameter manages the transmission speed of characters to the Host. A fast Keyboard Speed allows rapid transmission of a great amount of characters (for example 2D codes), but it might not be compatible with slower systems. 5.3 5.3.1 CODE SELECTION Issue Identical Codes This parameter manages the code transmission when more than one code containing the same information is detected in a single scan.
REFERENCES 5.5 CONFIGURATION EDITING COMMANDS The following commands carry out their specific function and do not require reading the Enter or Exit and Save Configuration codes. Command Description AMHKGPAOFNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJALECHGIK AKCBPJCJGIIJCMCFGPLCMMMNLK AEFBJLBGMHPKMOGNKKNDPDMGGK AAPHBAJIDGHPOJKEFPNCEACBHK AFKFBKNGLGMOMELLGOPCMJFKIK DDDDLDLLLDDLLLLDDDLDDLDLDL Restore PowerScan® PD8530 reader default configuration.
POWERSCAN® PD8530 6 TEST CODE SYMBOLS Use these 1D and 2D test symbols to check that the reader is imaging and decoding properly, according to your configuration.
TEST CODE SYMBOLS QR PDF417 DataMatrix (Normal) DataMatrix (Inverse) 115
POWERSCAN® PD8530 7 MAINTENANCE You do not need to perform regular preventative maintenance on the PowerScan® PD8530 reader. Do not try to open the case, because you might damage the interior electronic components and such action voids the warranty. You can keep your reader in good operating condition by: periodically cleaning the reading window using water or a mild detergent solution and a soft cloth or tissue. watching for any damage to the housing.
TECHNICAL FEATURES 8 TECHNICAL FEATURES PowerScan® PD8530 Family Common Features Electrical Features Operating Voltage 5 to 30 V Power Consumption @ 5V (Typical) 600 mA @30V (Typical) 100 mA Communications Features Standard Interfaces RS-232, Keyboard emulation AT IBM, USB COM emulation, USB Keyboard emulation Proprietary Interfaces USB Bulk, USB Generic HID Environmental Features Operating Temperature -10° to +55° C (+14° to +131° F) Storage Temperature -20° to +70° C (-4° to +158° F) Humidity 0 to 95%
POWERSCAN® PD8530 PowerScan® PD8530™ Optical Features Focus distance Field of view Horizontal field of view at distance (d) in mm Vertical field of view at distance (d) in mm Max Resolution Depth of field* 1D (linear): Code39 140 mm 28° (H) x 23° (V) 0.52d + 15 0.42d + 12 Linear codes mm (mils) 0.10 (4 mils) PDF 417 – mm (mils) 0.10 (4 mils) X-dimension mm (mils) 0.13 (5) DOF cm (in) 7.5 to 15.5 (2.95 to 6.10) 5.5 to 36.5 (2.17 to 14.37) 5.0 to 27 (1.97 to 10.63) DOF cm (in) 8.0 to 18.5 (3.15 to 7.
TECHNICAL FEATURES PowerScan® PD8530™ HD Optical Features Focus distance Field of view Horizontal field of view at distance (d) in mm Vertical field of view at distance (d) in mm Max Resolution Depth of field* 1D (linear): Code39 EAN13 2D: PDF417 QR DATAMATRIX Skew Pitch Rotation Print Contrast (Min.) 65 mm 27° (H) x 22° (V) 0.50d + 13 0.40d + 10 Linear codes mm (mils) 0.05 (2 mils) X-dimension mm (mils) 0.08 (3) 0.13 (5) 0.51 (20) 0.33 (13) X-dimension mm (mils) 0.08 (3) 0.13 (5) 0.25 (10) 0.
POWERSCAN® PD8530 PowerScan® PD8530™ WA Optical Features Focus distance Field of view Horizontal field of view at distance (d) in mm Vertical field of view at distance (d) in mm Max Resolution Depth of field* 1D (linear): Code39 115 mm 54° (H) x 45° (V) 1.04d + 40 0.40d + 10 Linear codes mm (mils) 0.13 (5 mils) PDF 417 – mm (mils) 0.13 (5 mils) X-dimension mm (mils) 0.13 (5) 2D: PDF417 0.33 (13) X-dimension mm (mils) 0.13 (5) 0.25 (10) QR 0.19 (7.5) 0.25 (10) DataMatrix 0.19 (7.5) 0.
TECHNICAL FEATURES 8.1 8.1.1 INDICATORS PowerScan® PD8530 LED Indicators The PowerScan® PD8530 family uses green LED indicators to signal the following reader functions: STATUS BEHAVIOR Power ON At power-on, the LEDs blink briefly, then light up for 2 seconds to signal the power supply is present. The LED lights up after a good decoding and will switch off only at the next trigger press. Normal Function 8.1.
POWERSCAN® PD8530 A HOST CONFIGURATION STRINGS In this section we provide a description of how to modify the device configuration using serial strings sent from the Host. This method requires the RS-232, USB-Com, USB Bulk or USB Generic HID interface. The device configuration can be changed by receiving commands from the Host through the current interface. When this method is used, the programming sequence format is the following: $+ Command $- CR Carriage return character (0D Hex.
HOST CONFIGURATION STRINGS SERIAL CONFIGURATION STRINGS ENTER/EXIT CONFIGURATION COMMANDS DESCRIPTION Enter Configuration Exit and Save Configuration Restore Default Transmit Software Release Transmit Device Configuration in ASCII Save Custom Default Restore Custom Default These commands do not require $- STRING $+ $$+$* $+$! $?$& $+$0 $+$1 INTERFACE SELECTION DESCRIPTION RS-232 Standard WEDGE for IBM AT USB USB COM USB-KBD USB Bulk USB Generic HID USB IBM STRING CPA0 CPA1 CPA3 CPA4 CPA2 CPA5 CPA7 RS-23
POWERSCAN® PD8530 RS-232 (continued) DESCRIPTION FIFO disabled enabled RX Timeout Intercharacter Delay Intercode Delay Serial Trigger Lock disabled enabled Serial trigger Lock/Unlock characters x = Hex value from 00 to FF STRING DDC0 DDC1 DEB00 - DEB99 DEA00 - DEA99 DEC00 - DEC99 DDB0 DDB1 CQBxx USB DESCRIPTION USB-COM Handshake ACK/NACK Protocol FIFO RX Timeout Intercharacter Delay Intercode Delay IBM USB Device Usage STRING none RTS/CTS XON/XOFF disabled enabled disabled enabled Table top Handhel
HOST CONFIGURATION STRINGS DATA FORMAT (continued) DESCRIPTION Set Headers Headers Set Terminators Terminators one character two characters three characters four characters five characters six characters seven characters eight characters nine characters ten characters disabled enabled no terminator one character two characters three characters four characters five characters six characters seven characters eight characters nine characters ten characters disabled enabled STRING EDA01x EDA02xx EDA03xxx E
POWERSCAN® PD8530 POWER SAVE DESCRIPTION Illumination System Power Illumination System OFF Illumination System ON CODE SELECTION DESCRIPTION Disable All Symbologies Disable All Linear Symbologies Disable All 2D Symbologies Issue Identical Codes disabled enabled LINEAR SYMBOLOGIES UPC/EAN/JAN disabled enabled Add-on disabled enabled UPCE extension enabled disabled Code 39 Standard disabled no ckeck digit control ckeck digit control without transmission ckeck digit control and transmission Full ASCII disab
HOST CONFIGURATION STRINGS CODE SELECTION DESCRIPTION STRING LINEAR SYMBOLOGIES Interleaved 2/5 Codabar Code 128 EAN 128 Code 93 GS1 DataBar™ Family disabled enabled – no check digit control enabled – check digit control and without transmission enabled – check digit control and transmission Code Len Check disabled enabled Minimum Code Length Maximum Code Length disabled enabled – no check digit control enabled – check digit control and without transmission enabled – check digit control and transm
POWERSCAN® PD8530 CODE SELECTION (continued) DESCRIPTION STRING GS1 DataBar disabled Expanded Stacked enabled GS1 DataBar disabled Stacked enabled d= d = a number in the range 001-255 128 a number from the HEX/Numeric Table AMD0 AMD1 AME0 AME1
HOST CONFIGURATION STRINGS CODE SELECTION DESCRIPTION 2D SYMBOLOGIES PDF417 disabled enabled Macro PDF417 Micro PDF417 DataMatrix QR Family Postal Codes Australian Table Maxicode unbuffered mode buffered mode disabled enabled disabled enabled Minimum Code Length Maximum Code Length Rectangular disabled Style enabled disabled enabled all disabled Australian Post - enabled Japan Post - enabled PLANET - enabled POSTNET - enabled POSTNET with B and B’ - enabled POSTNET and PLANET - enabled POSTNET with B a
POWERSCAN® PD8530 CODE SELECTION (continued) DESCRIPTION Composite Code disabled enabled Discard Linear Part e= disabled enabled STRING ANA0 ANA1 ANB0 ANB1 a number from the HEX/Numeric Table e = a number in the range 0001-3600 READING PARAMETERS DESCRIPTION Trigger Mode Trigger Type Flash On Duration Flash Off Duration Beeper Tone Beeper Volume Beeper Duration Reads per Cycle Scan Timeout User Defined Beeper Tone User Defined Beeper Volume trigger level trigger pulse normal trigger software trig
HOST CONFIGURATION STRINGS CODE ORDERING AND SELECTION Code per Scan Central Code Transmission Order by Code Length f= one code per scan all codes per scan disabled enabled disabled enabled - increasing order enabled - decreasing order BCB0 BCB1 OAA0 OAA1 OAB0 OAB1 OAB2 a number from the HEX/Numeric Table f = a number in the range 01-99 READING PARAMETERS DESCRIPTION AUTOSCAN Autoscan Mode STRING disabled enabled in normal mode enabled in pattern mode disabled enabled disabled enabled disabled enabl
POWERSCAN® PD8530 ADVANCED IMAGE CAPTURE DESCRIPTION IMAGE PRESET 1 Advanced Configuration Brightness STRING increase decrease increase decrease 2 gray levels 16 gray levels 256 gray levels Contrast Color Depth IAO0IAFi IAO1IAF1i IAP0IAEi IAP1IAEi IAG0 IAG1 IAG2 i= a number from the HEX/Numeric Table i = a number in the range 0-100 ADVANCED IMAGE CAPTURE DESCRIPTION IMAGE PRESET 2 Basic Configuration Image Format STRING JPEG format TIFF format full resolution (1280 x 1024) half resolution (640 x 512
HOST CONFIGURATION STRINGS ADVANCED IMAGE CAPTURE DESCRIPTION IMAGE PRESET 3 Basic Configuration Image Format STRING JPEG format TIFF format full resolution (1280 x 1024) half resolution (640 x 512) Resolution JPEG Quality Factor Advanced Configuration Brightness increase decrease increase decrease 2 gray levels 16 gray levels 256 gray levels Contrast Color Depth g, i = ICA1 ICA2 ICB0 ICB1 ICCg ICO0ICFi ICO1ICF1i ICP0ICEi ICP1ICEi ICG0 ICG1 ICG2 a number from the HEX/Numeric Table g = a number in
POWERSCAN® PD8530 B PROGRAMMING FOR EXPERT USERS This document is addressed to expert users who are familiar with software programming languages and want to define a personalized code formatting. The provided programming language allows creating either simple or complex formatting expressions by means of the basic functions connected together through the following operators: (, ), -, +.
PROGRAMMING FOR EXPERT USERS CONVENTIONS + #DS #F DESCRIPTION Concatenates two strings or fields. Deletes a substring or a field from the original string. Returns the string which has been decoded by the library. Returns the result of a format which has been previously defined. The value is in the range 1-4.
POWERSCAN® PD8530 SelectString (SSTR) This function has the following syntax: SSTRstring It extracts a substring whose characters are between "pos_start" and "pos_end" from the "source_string". If "pos_end" is longer than the "source_string" length, no error will be generated since the exceeding characters are ignored. The first character of every string is in position 1.
PROGRAMMING FOR EXPERT USERS StringDiscard This function has the following syntax: string1 - string2string This function discards all the strings having the same value as "string2" which can be found in "string1". If no "string2" is found within "string1", the result returns "string1". InsertString (ISTR) This function has the following syntax: ISTRstring This function inserts a new string ("string1") within the "source_string" and places it in the defined "position".
POWERSCAN® PD8530 Examples The string transmitted is 12345abcdef3790 and corresponds to the #DS function, as defined in the programming language.
CODE IDENTIFIER TABLE C CODE IDENTIFIER TABLE EAN/UPC CODABAR APCPCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKEGBHIK AKCBPJCJGIIJCMCEGOMAPFDLJK AEFBJLBGMHPLMNBJDBAMFHOEGK AAPHBAJJCCDBJLHEJOHAEJBBFK AEKFAMIOGAHEOFFNJLAMEFIJKK DLDLLLDLDLDLLLLDLDDDDLDLDL APCPCIHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALEEHFIK AKCBPJCJGIIJCMCFGJKHILNJLK AEFBJLBGMHPLMNGOJAGECBEFGK AAPHBAJICHELJEAHOIHPKBLLFK AFLFAIKFBDOOEJMDCFEIOGNIJK DLLLLLDLLLLLLLLDDLDDDLDLLL CODE 128 EAN 128 APCLGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAK
POWERSCAN® PD8530 DATAMATRIX MAXICODE AODKGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFCCHIK AKCBPJCJGIIJCMCFGJJCFJLDPK AEFBJLBGMHPLMJBFPMGFAJNHGK AAPHBAJJCBEPCBEDOJMDKCEPHK AFLFAOMAAGDAEANNKJGIKJJILK DDLLLLDLDLLLLLLDDLDDDLDLLL AODOCIHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALEDGGIK AKCBPJCJGIIJCMCEGPJBKCKBPK AEFBJLBGMHPKNOBHBAAHNLBHGK AAPHBAJJCBALNMOKADEFFEFPDK AHLFAIOCLKCGGEJEJHNOIBDKLK DDLLLLDLDLDLLLLDDLDDDLDLDL QR AUSTRALIA POST AODKGIHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFAEFIK AKCBPJCJGIIJCMCEG
HEX AND NUMERIC TABLE D HEX AND NUMERIC TABLE CHARACTER TO HEX CONVERSION TABLE char decimal hex char decimal hex char decimal hex NUL SOH STX ETX EOT ENQ ACK BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US SPACE ! " # $ % & ' ( ) 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 1
POWERSCAN® PD8530 0 1 ANFOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFHBHIK AKCBPJCJGIIJCMCFGPOFMJLDJK AEFBJLBGMHPKNIFGJCGBBDNHGK AAPHBAJJDEBJCDJAGBDLGHNFHK AFKEBJJPCPKMAJNAMBKKKCFJKK DLDLLLDDDLLLLLLDLLDDDLDLLL ANEPGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALEHEEIK AKCBPJCJGIIJCMCEHPLFIKNHNK AEFBJLBGMHPKMKGPIEMNLKLEGK AAPHBAJIDGFBMBLDDDNIEPNNFK AEKEBJMNMOKOIOPNEFCOIJJLJK DLDLLLDDLDDLLLLDDDLDDLDLLL 2 ANEOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKEFGHIK AKCBPJCJGIIJCMCEGMILJPPDNK AEFBJLBGMHPKMKEKGKAMOGNE
HEX AND NUMERIC TABLE 5 6 AMEPGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFAAEIK AKCBPJCJGIIJCMCEGJNDOAMLNK AEFBJLBGMHPLMLCPBCACOJIFGK AAPHBAJIDCFJGLHNIKABJCDBBK AHKEBJNIIGGECEIHHDDMMFLLIK DDDLLLDDLLDLLLLDLLDDDLDLDL AMEOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCCHIK AKCBPJCJGIIJCMCEHKONPFOPNK AEFBJLBGMHPLMLAKPMMDLFOFGK AAPHBAJJDAFFBDLFDPELPHEHHK AHLEBMLPCDIMIIAFIFJIMOLLKK DLLLLLDDDDDLLLLDDDDDDLDLDL 7 ANFNGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFCHFIK AKCBPJCJGIIJCMCEHJLAGJEHJK AEFBJLBGMHPKMMHJBODN
POWERSCAN® PD8530 144 A B APCPGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFABHIK AKCBPJCJGIIJCMCEHLIFKKKFJK AEFBJLBGMHPKNMFGFGAOPLOGGK AAPHBAJJDAECFFJNDGOFJPBHFK AFKEBKMFNHHIOOPEFNLCMAMLLK DLLLLLDDLDDLLLLDDLDDDLDLLL APCOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCDEIK AKCBPJCJGIIJCMCEGILLLPIBJK AEFBJLBGMHPKNMHDLIMPKHIGGK AAPHBAJIDCEOCNFFIDKPPKGBDK AFLEBPKCHCJAECHGKLBGMLMLJK DDDLLLDDDLDLLLLDLDDDDLDLLL C D AODPGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFFCHIK AKCBPJCJGIIJCMCFGOINJGPJNK AEFBJLBGMHPLMPA
HEX AND NUMERIC TABLE AUTOSCAN PATTERN CODE ÌÄÄsÎ 145
POWERSCAN® PD8530 NOTES 146
EC-049 DECLARATION OF CONFORMITY REV.: 0 Pag.: 1 di 1 08 Datalogic Scanning Group Srl Via S.
Australia Japan Datalogic Scanning Pty Ltd Telephone: [61] (2) 9870 3200 australia.scanning@datalogic.com Datalogic Scanning KK Telephone: 81 (0)3 3491 6761 japan.scanning@datalogic.com France and Benelux Latin America Datalogic Scanning Sarl Telephone: [33].01.64.86.71.00 france.scanning@datalogic.com Datalogic Scanning, Inc Telephone: (305) 591-3222 latinamerica.scanning@datalogic.com Germany Singapore Datalogic Scanning GmbH Telephone: 49 (0) 61 51/93 58-0 germany.scanning@datalogic.
