Operation Manual

ManualsBrandsDatalogic ManualsVideoPowerScan D8590-DPM

Step 5 — Select Protocol

Select the communications protocol you are using and click Next.

USB

1. Print USB Connect Mode symbol (also shown in Install

Datalogic ESP step) and decode it with the imager to

ensure that you are in the correct communications mode.

Keep printed symbol in a convenient place for future use.

2. Click

when you are finished, and then click

Connect

when

you see the “Reader ID” number in the

Select Device

field.

RS-232

Select

RS-232

and click the

Show Connect Symbol

button.

Print the RS-232 Connect Mode symbol and decode it to

ensure that you are in the correct communications mode.

Keep the printed symbol in a convenient place for future

use. Click Next to return to the RS-232 dialog. Configure

RS-232 settings and COM port and click Connect.

From the default

USB settings, click

the Switch Mode

button to connect to

the reader in USB

HID Mode.

Click the Show

Connect Symbol

button for RS-232

Connect Mode

symbol.

Step 7 — Configure the Imager

Datalogic ESP’s EZ Mode is the first view that appears once

you are connected. This view features simple instructions and

tools for decoding symbol data and capturing images.

From here, you can click on App Mode to access tree controls

and graphic user interfaces with more comprehensive configuration

options.

Step 6 —

Connect to ESP

USB

Once you have clicked Connect in the USB imager ID dialog

(Step 5), the CONNECTED message will appear in a green box

in the status bar at the bottom right of the screen.

You are now ready to configure the USB POWERSCAN D8590

using Datalogic ESP.

RS-232

Once you have selected RS-232 settings and COM port and

clicked Connect, the CONNECTED message will appear in a

green box in the status bar at the bottom right of the screen.

You are now ready to configure the RS-232 POWERSCAN D8590

using Datalogic

ESP

Illumination Quick Setup

The following programming symbols allow you to set up and

control Dot Peen Enhanced illumination settings.

Illumination Default

Mode

Dot Peen Enhanced

Illumination Mode -

Large Mark

Dot Peen Enhanced

Illumination Mode -

Medium Mark

Dot Peen Enhanced

Illumination Mode -

Small Mark

Save

Settings

Frequently-Used Settings

The following programming symbols allow you to control

USB Keyboard

Mode, Targeting settings, and Beep and Vibration settings.

USB Keyboard

Mode

Targeting

LED On

(Default)

Targeting

LED Off

Vibrate On /

Beep On

(Default)

Vibrate On /

Beep Off

Vibrate Off /

Beep On

Save

Settings

Step 8 — Practice Decoding

The POWERSCAN D8590 features simple blue targeting LEDs to

indicate optimal read range.

1. Hold the imager about 6”

from the mark and align

the blue targeting pattern

as shown here.

2. Move the front of the imager

steadily downward toward

the mark and parallel to the

mark surface.

3. The imager will decode the

mark at the optimal read

distance – typically from the

point of contact to .50”

(contact – 12.70 mm).

Test

Symbol