Specifications

Enter Configuration

Exit and Save Configuration

Ì$+;Î

16-KEY DK MODEL PARAMETERS

Ì$-?Î

155

QTY/CODE MODE

en the scanner is in Quantity-Code Mode, the operator is prompted with two data fields

named QTY= and CODE= . The normal position of the cursor is in the QTY field; the

operator is required to type the quantity on the keypad, then press the "enter key" to move the

cursor to the CODE field. Data in the CODE field can either be entered manually from the

keypad or read through the scanner.

e pair quantity and code are then transmitted to the host in a single string with configurable

header, terminators and separator. Use the commands in the following sections to define the

configuration parameters.

QTY FIELD

This feature defines the behavior of the scanner if no data is entered in the QTY field so it is left

empty. Options are:

• code is transmitted with default QTY (‘1’)

• code is transmitted alone (without any quantity information)

• code is discarded and an error beep is generated



Transmit code with

default QTY (1)

Transmit code alone

(without any quantity

information)

Discard barcode,

generate error beep