Instruction manual

POWERSCAN® D8530 FAMILY
3
INDICATORS
LED INDICATORS
The PowerScan® D8530 family uses green LED indicators to signal the
following reader functions:
STATUS BEHAVIOR
Power ON At power-on, the LEDs blink briefly, then
light up for 2 seconds to signal the power
supply is present.
Normal Function
The LED lights up after a good decoding and
will switch off only at the next trigger press.
BEEPER
The PowerScan® D8530 basic software provides beeper signals for
good/wrong reading and for indicating errors. Its tone, volume and duration can
be directly configured by using the codes given in the PowerScan® D8530
Reference Manual available on the website.
The application program can also manage the beeper (User Defined Beeper)
when the reader is controlled by a Host PC. It is possible to activate the beeper
by sending a command from the Host to the reader via the current
communication interface.
GOOD READ SPOT
A green Good-Read Spot will be projected in the field of view when the reading
is successful.
SETUP
1. Make connections between PowerScan® D8530 and the Host PC using
the correct interface cable (see the following sections).
2. Read the correct Interface Selection code.
Your reader is now ready to read codes using the default settings.