User Manual

Enter/Exit Programming Mode

Product Reference Guide

131

Standard 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for Standard 2 of 5 Length

Control. Length 1 is the minimum label length if in Variable Length Mode, or

the first fixed length if in Fixed Length Mode. Length includes the bar code’s

check and data characters. The length can be

set from 1 to 50 characters.

Table 10 provides some examples for setting Length 1. See page 283 if you

want detailed instructions on setting this feature.

Table 10. Standard 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

01 Character 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CS2L1

Select Standard 2 of 5 Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort

and not save the entry string. You can then start

again at the beginning.

CANCEL

DEFAULT

08 = Length 1 is 8 Characters