Specifications
Table Of Contents
- Falcon® 4220
- Table of Contents
- Preface
- How to Use This Manual
- Document Overview
- Document Conventions
- Registering Your Product
- Batteries and Power
- Software Applications
- Configuring a PDA
- Networks, Communications, and Connections
- Technical Specifications
- Falcon® Desktop Utility for Windows®CE. NET
- Accessories & Peripherals
- Overview
- Using the Battery Charger
- Using the Car Charger/Adapter
- Installing Compact Flash Type Peripherals
- Using the Docks
- Using the Earphones / Microphone
- Ethernet Port
- Installing the Handstrap
- Installing the Handle
- Using a High Capacity Battery
- Holster
- Using the IrDA Port
- Using SD Memory Card
- Using the USB / Serial Connection
- Cable & Connector Configurations
- Maintenance, Troubleshooting, and Technical Support
- Glossary
Cable & Connector Configurations
D-2 Falcon
®
4220 Windows
®
CE PDA
Falcon Termination USB and Serial Cables
Ta bl e D -2 lists the Pin number and signal for Falcon (client) end of the 22 pin
Port, Serial or USB cable.
Table D-2. 22-Pin Port for the USB and Serial Cable,
Falcon Termination USB & Serial Cable
Pin# Signal Notes
1 DC_IN 5V Input from Adapter
2 DC_IN 5V Input from Adapter
3 DC_IN 5V Input from Adapter
4GND
5 DSR RS232 signal
6 RXD RS232 signal
7 CTS RS232 signal
8GND
9 DCD RS232 signal
10 RTS RS232 signal
11 TXD RS232 signal
12 DTR RS232 signal
13 USB_H_5
14 F_RING RS232 signal
15 GND
16 USB_B_D- (USB Client)
17 USB_B_D+ (USB Client)
18 GND
19 HOT SYNC
Input, Sync signal for
USB client, active high
20 USB_C_5V
21 GND
22 V+3.3 3.3 Volt power
All Pins Must
be Connected
All Pins must be Connected
No Connection