Specifications
Table Of Contents
- Falcon® 4220
- Table of Contents
- Preface
- How to Use This Manual
- Document Overview
- Document Conventions
- Registering Your Product
- Batteries and Power
- Software Applications
- Configuring a PDA
- Networks, Communications, and Connections
- Technical Specifications
- Falcon® Desktop Utility for Windows®CE. NET
- Accessories & Peripherals
- Overview
- Using the Battery Charger
- Using the Car Charger/Adapter
- Installing Compact Flash Type Peripherals
- Using the Docks
- Using the Earphones / Microphone
- Ethernet Port
- Installing the Handstrap
- Installing the Handle
- Using a High Capacity Battery
- Holster
- Using the IrDA Port
- Using SD Memory Card
- Using the USB / Serial Connection
- Cable & Connector Configurations
- Maintenance, Troubleshooting, and Technical Support
- Glossary
Using SD Memory Card
Product Reference Guide C-9
Using SD Memory Card
Secure Digital memory cards come in various data storage sizes.
To use a Secure Digital (SD) type card, complete the following steps:
1. Remove the SD cover located along the left side of the unit by removing
the two screws with a Phillips head screw-driver.
Figure C-8. Secure Digital Card
2. Make sure that the SD card is oriented correctly with the small notch on
the top left, and insert it into the SD card slot.
3. Replace the SD cover and screws securely.
To remove the card, remove the cover and press the exposed edge of the card to
release it.
SD Cover
SD Card