Specifications

Using the Docks
Product Reference Guide C-3
Figure C-2. Compact Flash Type II Memory Card
1. Remove the handstrap plate or the handle accessory if there is one on the
PDA. Refer to "Installing the Handstrap" on page
C-5 and the Handle
Accessory Installation Instructions included on the product CD for
more information.
2. Remove the screws from the CF cover by using a small Phillips head
screwdriver. Remove the CF cover plate.
3. Insert a CF card, making sure it is correctly oriented. Do not force it.
Refer to
Figure C-2C.
4. Replace the CF cover.
• For most CF cards, use the closed top cover. Using this cover main-
tains the IP54 Industrial seal rating. Refer to
Figure C-2B.
• For CF modules with external antennas, etc., use the CF cover with
the open slot at the top. Refer to
Figure C-2A.
Using the Docks
Refer to the Falcon 4220 Quick Reference Guide and the Falcon 4220 Dock
Instruction Sheet for more information on the Falcon 4220 Single- and Quad-
Slot docks.
a
bc
CF Card
CF Card
Open Slot
Sealed Unit
(no opening)
You will no longer be able to use the handstrap with a CF type peripheral requiring an
open cover.