Specifications

Falcon® Desktop Utility for Windows
®
CE. NET
B-4 Falcon
®
4220 Windows
®
CE PDA
1. Enter a password in the text box. This allows the user to specify a pass-
word when this utility is launched. By default there is no password
already set.
2. Re-enter the password in the second text box.
3. Select/tap
Set Password to enable the password.
4. Select/tap
OK close the Set Password Confirmation dialog.
Changing a Password
To change to a new password:
1. Enter a new value in the
Enter Password checkbox.
2. Re-enter the new value in the
Re-enter Password checkbox.
3. Select/tap the
Set Password button.
Removing a Password
To remove a password:
1. Enter blanks in both
Password fields.
2. Select/tap the
Set Password button.
Password Request Dialog Box
Once the password is set, the next time you open the Falcon Desktop Utility, the
FDU Password dialog box opens.
This dialog box will not open if no password was defined.
You must select/tap the Set Password button prior to exiting FDU in order to store and
activate your new password. It is not necessary to select Enable Falcon Desktop.
CAUTION
If you select/tap the Restore Defaults button it will remove all custom settings and
restore all the factory default settings, except a previously set password.