Specifications
Table Of Contents
- Falcon® 4220
- Table of Contents
- Preface
- How to Use This Manual
- Document Overview
- Document Conventions
- Registering Your Product
- Batteries and Power
- Software Applications
- Configuring a PDA
- Networks, Communications, and Connections
- Technical Specifications
- Falcon® Desktop Utility for Windows®CE. NET
- Accessories & Peripherals
- Overview
- Using the Battery Charger
- Using the Car Charger/Adapter
- Installing Compact Flash Type Peripherals
- Using the Docks
- Using the Earphones / Microphone
- Ethernet Port
- Installing the Handstrap
- Installing the Handle
- Using a High Capacity Battery
- Holster
- Using the IrDA Port
- Using SD Memory Card
- Using the USB / Serial Connection
- Cable & Connector Configurations
- Maintenance, Troubleshooting, and Technical Support
- Glossary
Networks, Communications, and Connections
4-8 Falcon
®
4220 Windows
®
CE PDA
Network Setup: Remote ActiveSync
An ActiveSync Partnership must be established between the PDA and the
desired host prior to using Remote ActiveSync. Refer to "Setting up a Partner-
ship" starting on page
4-4 for more information.
To execute
Remote ActiveSync, complete the following steps:
1. Go to
Start > Settings > Network ActiveSync.
2. Verify that Network Configuration is selected from the
Method
to Connect
pull-down list.
3. Select the target host that you wish to ActiveSync with from the
Connect
To
pull-down list.
4. Press the
Connect button.
5. A network
ActiveSync connection will be established.
Network functions and operations work the same when using the dock.