Specifications

Networking
Product Reference Guide 4-7
Network and Dialup Connections
RF Configuration Parameters
Use this utility to set different profile combinations and designate the current
profile for the wireless RF card.
Figure 4-5. Wireless Configuration
To set the RF configuration parameters, complete the following steps:
1. To open the
Wireless Properties, tap the Network icon in the system tray
or select a hotkey. (Refer to Figure
4-5A.)
2. Select the network you wish to access and press
Connect, or tap for more
options. (Refer to Figure
4-5B.)
3. To add a new network, double-tap
Add New. (Refer to Figure 4-5B.)
4. Press
OK from the control bar, or press the <Enter> key on the keypad.
Network Icon
B
A
C
CAUTION
Do not attempt to troubleshoot a network using this control panel.