Specifications
Table Of Contents
- Falcon® 4220
- Table of Contents
- Preface
- How to Use This Manual
- Document Overview
- Document Conventions
- Registering Your Product
- Batteries and Power
- Software Applications
- Configuring a PDA
- Networks, Communications, and Connections
- Technical Specifications
- Falcon® Desktop Utility for Windows®CE. NET
- Accessories & Peripherals
- Overview
- Using the Battery Charger
- Using the Car Charger/Adapter
- Installing Compact Flash Type Peripherals
- Using the Docks
- Using the Earphones / Microphone
- Ethernet Port
- Installing the Handstrap
- Installing the Handle
- Using a High Capacity Battery
- Holster
- Using the IrDA Port
- Using SD Memory Card
- Using the USB / Serial Connection
- Cable & Connector Configurations
- Maintenance, Troubleshooting, and Technical Support
- Glossary
Configuring a PDA
3-16 Falcon
®
4220 Windows
®
CE PDA
Volume and Sounds
The factory default for the Volume is maximum. You can adjust the volume to
your environment and comfort. There are two ways to adjust the volume.
Using the <FN2> Key to Adjust the Volume
The first method is accomplished without accessing the Volume & Sounds Prop-
erties
control panel and is described below:
1. Press the
<FN2> key while simultaneously pressing on the Up or Down
edge of the
Navigation key.
2. Press the
Right edge to increase volume and the Left edge to decrease vol-
ume.
3. Adjust as desired.
4. To mute the sound, press
<FN2>+<3> simultaneously. Press these keys
again simultaneously to toggle the sound on again.
Using the Control Panel to Adjust Volume and Sounds
The second method uses the Volume &
Sounds Properties
control panel and is
described below:
1. Select the
Start > Settings > Control
Panel > Volume & Sounds Properties
to open the
Volume settings.
2. Set the volume by adjusting the
slider from
Soft to Loud.
3. Enable the desired sounds for key
clicks, screen taps, notifications,
and applications.