Specifications
Table Of Contents
- Falcon® 4220
- Table of Contents
- Preface
- How to Use This Manual
- Document Overview
- Document Conventions
- Registering Your Product
- Batteries and Power
- Software Applications
- Configuring a PDA
- Networks, Communications, and Connections
- Technical Specifications
- Falcon® Desktop Utility for Windows®CE. NET
- Accessories & Peripherals
- Overview
- Using the Battery Charger
- Using the Car Charger/Adapter
- Installing Compact Flash Type Peripherals
- Using the Docks
- Using the Earphones / Microphone
- Ethernet Port
- Installing the Handstrap
- Installing the Handle
- Using a High Capacity Battery
- Holster
- Using the IrDA Port
- Using SD Memory Card
- Using the USB / Serial Connection
- Cable & Connector Configurations
- Maintenance, Troubleshooting, and Technical Support
- Glossary
Configuring a PDA
3-14 Falcon
®
4220 Windows
®
CE PDA
System Properties
Refer to the System control panel for information related to the system.
General Tab
Select Start > Settings > Control Panel >
System Properties > General
tab to deter-
mine the following information about
your PDA:
• Firmware version (in parens).
• Serial number (S/N).
Memory Allocation
Adjust the Memory Allocation with the
following steps:
1. Select
Start > Settings > Control
Panel > System Properties
.
2. Select the
Memory tab.
3. Move the slider to adjust mem-
ory allocation. Default storage
memory is normally set to about
8 MB with the remainder
assigned to Program memory.
4. Press the
OK button, or the
<Enter> key on the Falcon.