Specifications
Table Of Contents
- Falcon® 4220
- Table of Contents
- Preface
- How to Use This Manual
- Document Overview
- Document Conventions
- Registering Your Product
- Batteries and Power
- Software Applications
- Configuring a PDA
- Networks, Communications, and Connections
- Technical Specifications
- Falcon® Desktop Utility for Windows®CE. NET
- Accessories & Peripherals
- Overview
- Using the Battery Charger
- Using the Car Charger/Adapter
- Installing Compact Flash Type Peripherals
- Using the Docks
- Using the Earphones / Microphone
- Ethernet Port
- Installing the Handstrap
- Installing the Handle
- Using a High Capacity Battery
- Holster
- Using the IrDA Port
- Using SD Memory Card
- Using the USB / Serial Connection
- Cable & Connector Configurations
- Maintenance, Troubleshooting, and Technical Support
- Glossary
Storage Properties
Product Reference Guide 3-13
Storage Properties
To change the Storage Properties control panel default settings:
Insert a compact flash (CF) or secure
digital (SD) storage card into the unit
(refer to "Installing Compact Flash
Type Peripherals" starting on page
C-2).
7. Select
Start > Settings > Control
Panel > Storage Properties
.
8. From the
Store Info pull-down list,
select the desired storage device.
9. You can also format, dismount,
and create partitions on storage
devices using this control panel.
10. To save and exit the
Storage Prop-
erties
control panel, press OK from
the control bar, or press the
<Enter> key on the keypad.
CAUTION
Dismounting or formatting the DiskOnChip will erase all files and programs stored in
Flash Memory.