Specifications

Configuring a PDA
3-12 Falcon
®
4220 Windows
®
CE PDA
Table 3-2. Scanner Configuration Barcode Tab
5. On the General tab (Figure 3-3C), select from the options in Figure 3-2
to save or keep your settings.
Table 3-3. Scanner Configuration General Tab
6. To exit the Scanner Configuration applet, press OK from the control bar,
or press the
<Enter> key on the keypad.
Field Name Function/Operation
Symbology list Select the bar code symbology from this pull-down list.
Enable this Code
Tap/enable this checkbox to enable the selected bar code sym-
bology.
Symbology features
Select the desired features you wish to enable for that specific bar
code symbology.
Length
Set the minimum and maximum lengths from the pull-down lists. If
the numbers are the same, acceptable bar codes will only be that
length.
Not all symbologies will have this option enabled.
Button Name Function/Operation
Try with Current
Setting
This button is enabled only if you make changes to the current settings.
1. Tap the Try with Current Setting button.
2. Press the <Scan> key.
3. Check the result.
4. If you wish to keep the new current settings, select the Commit Cur-
rent Setting button.
Commit Current
Setting
After modifying the current settings, if you wish to keep them, select the
Commit Current Setting button.
Load Factory
Default
After modifying the current settings, if you wish to return to the factory
defaults, tap the Load Factory Default button.
Revert to last
setting
After modifying the current settings, if you wish to return to the previous
settings, tap the Revert to Last Setting button.