Specifications

Configuring a PDA
3-10 Falcon
®
4220 Windows
®
CE PDA
Scanner Settings
To change the Scanner Settings and bar code symbologies, complete as follows:
1. Go to
Start > Programs > Scanner > Quick ScanSet to open the bar code
scanning application. The only indicator that the program is open is the
bar code
System Tray icon.
2. Select/tap the bar code icon in the
System Tray to open the menu shown
on the left in Figure
3-2A.
•Select
Settings to open the Scanner Configure applet.
Figure 3-2. Scanner Configuration Settings
• You can modify the settings either from the menu (Figure 3-2A) or by
selecting
Setting > Basic tab (Figure 3-2B). Complete as described in
Ta bl e 3 -1 .
Table 3-1. Scanner Configuration Menu and Basic Tab
Section
(Menu Item)
Field Name Function/Operation
Basic Beep
Tap/enable this checkbox to receive beep tone
when scanning, or select from the menu.
Trigger Timeout
(sec.)
Select a trigger timeout duration (in seconds) from
this pull-down list.
B
A
Tap the Quick
ScanSet Icon
to modify the
applet settings.