Specifications
Table Of Contents
- Falcon® 4220
- Table of Contents
- Preface
- How to Use This Manual
- Document Overview
- Document Conventions
- Registering Your Product
- Batteries and Power
- Software Applications
- Configuring a PDA
- Networks, Communications, and Connections
- Technical Specifications
- Falcon® Desktop Utility for Windows®CE. NET
- Accessories & Peripherals
- Overview
- Using the Battery Charger
- Using the Car Charger/Adapter
- Installing Compact Flash Type Peripherals
- Using the Docks
- Using the Earphones / Microphone
- Ethernet Port
- Installing the Handstrap
- Installing the Handle
- Using a High Capacity Battery
- Holster
- Using the IrDA Port
- Using SD Memory Card
- Using the USB / Serial Connection
- Cable & Connector Configurations
- Maintenance, Troubleshooting, and Technical Support
- Glossary
Configuring a PDA
3-4 Falcon
®
4220 Windows
®
CE PDA
Display Configuration
To modify the display and/or backlight of the PDA refer to the following:
Background
To change the Background image:
1. The current file is located in the
Windows directory with the PSC
logo file named PSC.bmp.
2. Place a new image in the Win-
dows directory. This file must be
exactly 240 by 320 pixels.
3. Select
Start > Settings > Control
Panel > Display
.
4. Select the new file name by using
the
Browse button.
5. To exit the
Background settings,
press
OK from the control bar, or press the <Enter> key on the keypad.
Backlight
To change the Backlight default settings:
1. Select
Start > Settings > Control
Panel > Display > Backlight
tab.
2. Select the
Backlight tab.
3. Modify the backlight pull-down
list settings to suit your require-
ments.
4. Tap/enable the
User Dim Backlight
checkbox to allow the user to
adjust the backlight by using the
<FN2> key with navigation key to
increase or decrease the backlight.
5. To exit the
Backlight settings,
press
OK from the control bar, or press the <Enter> key on the keypad.