Specifications
Table Of Contents
- Falcon® 4220
- Table of Contents
- Preface
- How to Use This Manual
- Document Overview
- Document Conventions
- Registering Your Product
- Batteries and Power
- Software Applications
- Configuring a PDA
- Networks, Communications, and Connections
- Technical Specifications
- Falcon® Desktop Utility for Windows®CE. NET
- Accessories & Peripherals
- Overview
- Using the Battery Charger
- Using the Car Charger/Adapter
- Installing Compact Flash Type Peripherals
- Using the Docks
- Using the Earphones / Microphone
- Ethernet Port
- Installing the Handstrap
- Installing the Handle
- Using a High Capacity Battery
- Holster
- Using the IrDA Port
- Using SD Memory Card
- Using the USB / Serial Connection
- Cable & Connector Configurations
- Maintenance, Troubleshooting, and Technical Support
- Glossary
Software Applications
2-14 Falcon
®
4220 Windows
®
CE PDA
Updating Falcon Firmware
After copying the firmware image to the host PC and extracting the FUU util-
ity, you can upgrade the firmware on your PDA.
1. Go to
Start > Programs > Firmware Update Utility > FUU.
2. Double-click on the FUU.exe file.
3. Verify that ActiveSync is selected from the
Communicate Using pull-down
list.
4. Click the
File Select (Browse...) button and navigate to the file location.
5. Select the current *.bin file and press the
Open button.
Figure 2-8. Select the.bin file
6. Verify that the PDA is turned on. Insert the Falcon into a powered dock
connected to the host computer.
7. Press the
Query button on the FUU utility on the host PC.
The following steps require that you have already established an ActiveSync
connection between the host computer and the PDA. To establish an ActiveSync
connection with the Falcon, refer to "Installing & Setting Up Microsoft® ActiveSync"
on page
4-1.