Instructions

Enter/Exit Programming Mode
Product Reference Guide 259
Set String Terminator
Sets the terminator of the predefined strings.
$CPWEF
Set String Terminator
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left fol
lowed by 32 digits from the Alphanumeric charac-
ters in
Appendix D, Keypad.
The digits must be the hexadecimal ASCII representation
of the desired charac
ters. If less than the expected
string of 16 characters are selected, scan the ENTER/
EXIT bar code to terminate the string.
If the first 2 digits are 0, the feature is disabled. End by
scanning the ENTER/EXIT ba
r code again.
Make a mistake? Scan the CANCEL bar code to abort and
not
save the entry string. You can then start again at the
beginning.
~
CANCEL