Instructions

Enter/Exit Programming Mode
Product Reference Guide 255
FUNCTION KEYS CONFIGURATION (16-KEY MODELS ONLY)
Function Keys F3 through F5 are available on 16-key models only. For more
16-key programming, see "Additional Features for 16-key models" on
page 260.
DEFAULT
$CPWEU0000\r
F3 No Actions Configured
$CPWEU
Configure Actions for F3
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code for
the Func
tion Key you want to program. Next scan 4 dig-
its from the Alphanumeric characters in
Appendix D,
Keypad
.
The first digit must be 0; the following 3 digits must be
configured according to the CMD_ID numbers in
Table 27 on page 253 . End by scanning the
ENTER/EXIT bar code again.
Configure Actions for F3 (16-key models only)
DEFAULT
$CPWES0000\r
F4 No Actions Configured
$CPWES
Configure Actions for F4
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code for
the Func
tion Key you want to program. Next scan 4 dig-
its from the Alphanumeric characters in
Appendix D,
Keypad
.
The first digit must be 0; the following 3 digits must be
configured according to the CMD_ID numbers in
Table 27 on page 253 . End by scanning the
ENTER/EXIT bar code again.
Configure Actions for F4 (16-key models only)