Spec Sheet

www.datalogic.com
TECHNICAL SPECIFICATIONS
DECODING CAPABILITY
1D / LINEAR CODES Autodiscriminates all standard 1D codes
including GS1 DataBar™ linear codes.
STACKED CODES Code 16K; Code 49; GS1 DataBar Expanded
Stacked;
GS1 DataBar Stacked; GS1 DataBar Stacked
Omnidirectional
ELECTRICAL
CURRENT Operating (Typical): D8330: 420 mA @ 4 V;
310 mA @ 5 V; 62 mA @30 V
D8340: 500 mA @ 4 V; 370 mA @ 5V; 70 mA @
30 V
Standby/Idle (Typical): 4 mA
INPUT VOLTAGE 4 - 30 VDC
ENVIRONMENTAL
AMBIENT LIGHT Immune to light exposure in offices/facilities and
direct exposure to sunlight
DROP RESISTANCE Withstands 50 drops from 2 m / 6.6 ft to
concrete
ESD PROTECTION (AIR DISCHARGE) 20 kV
HUMIDITY (NON-CONDENSING) 90%
PARTICULATE AND WATER SEALING IP65
TEMPERATURE Operating: -30 to 50 °C / -22 to 122 °F
Storage/Transport: -30 to 50 °C / -22 to 122 °F
INTERFACES
INTERFACES Keyboard Wedge; RS-232; Undecoded Laser
Output-Model D8340 Only; USB; Wand
PHYSICAL CHARACTERISTICS
COLORS AVAILABLE Yellow/Black
DIMENSIONS 20.7 x 11.4 x 6.9 cm / 8.1 x 4.5 x 2.7 in
WEIGHT 295.0 g / 10.4 oz
READING PERFORMANCE
LIGHT SOURCE 630 - 680 nm VLD
Aiming: 630 - 680 nm VLD, Activated by
‘Double-Click’ Trigger
PRINT CONTRAST RATIO (MINIMUM) 15%
READ RATE (MAXIMUM) 35 +/- 5 scans/sec.
READING ANGLE Pitch: 5 to 55° / -5 to -55°; Roll (Tilt): +/- 20°;
Skew (Yaw): +/- 60°
READING INDICATORS Beeper; Datalogic Three Green Lights (3GL™)
Good Read Feedback: Datalogic ‘Green Spot’ on
the Code, Dual Good Read LEDs
RESOLUTION (MAXIMUM) D83X0: 0.076 mm / 3 mils;
D83X0 Auto Range: 0.190 mm / 7.5 mils
READING RANGES
TYPICAL DEPTH OF FIELD Minimum distance determined by symbol length
and scan angle.
Printing resolution, contrast, and ambient light
dependent.
PD8300
5 mils: 2.1 to 13.3 cm / 0.8 to 5.2 in
7.5 mils: 3.5 to 24.2 cm / 1.4 to 9.5 in
10 mils: 2.9 to 42.8 cm / 1.1 to 16.8 in
13 mils: 2.3 to 55.1 cm / 0.9 to 21.7 in
20 mils: 6.3 to 78.5 cm / 2.5 to 30.9 in
40 mils: 2.5 to 97.8 cm / 1.0 to 38.5 in
PD8300 AR
7.5 mils: 7.0 to 46.5 cm / 2.7 to 18.3 in
10 mils: 10.8 to 85.0 cm / 4.2 to 33.5 in
13 mils: 12.7 to 147.3 cm / 5.0 to 58.0 in
20 mils: 7.0 to 215.9 cm / 2.7 to 85.0 in
40 mils: 16.0 to 340.0 cm / 6.3 to 133.8 in
55 mils: 0.2 to 4.1 m / 0.7 to 13.5 ft
Reflective -100 mils: 1.5 to 12.5 m / 4.9 to 41.0 ft
SAFETY & REGULATORY
AGENCY APPROVALS The product meets necessary safety and
regulatory approvals for its intended use.
The Quick Reference Guide for this product can
be referred to for a complete list of certifications.
ENVIRONMENTAL COMPLIANCE Complies to EU RoHS
LASER CLASSIFICATION Caution Laser Radiation - Do not stare into beam
CDRH Class II
IEC 60825-1 Class 2
UTILITIES
DATALOGIC ALADDIN™ Datalogic Aladdin configuration program is
available for download at no charge.
WARRANTY
WARRANTY 3-Year Factory Warranty
ACCESSORIES
© 2007 - 2014 Datalogic ADC, Inc. • All rights reserved. • Protected to the fullest extent under U.S. and international laws. • Copying, or altering of this document is prohibited without express
written consent from Datalogic ADC, Inc. • Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. • 3GL and Datalogic Aladdin are
trademarks of Datalogic Scanning Group S.r.l. • PowerScan is a registered trademark of Datalogic ADC, Inc. in many countries, including the U.S. and the E.U. • All other brand and product names
are trademarks of their respective owners. • DS-POWERSCANPD8300-ENA4 Revision F 20140410
POWERSCAN™ PD8300
Cases/Holsters
• 11-0138 Heated Holder, 36 VDC
• 11-0139 Heated Holder, 24 VDC
• 11-0140 Heated Holder, 48 VDC
• HLS-P080 Universal Holster (HLS-8000)
• PC-P080 Protective Case/Belt Holster (PC-8000)
Mounts/Stands
• 7-0404 Industrial Take-Up Reel
• HLD-P080 Desk/Wall Holder (HLD-8000)
• STD-P080 Hands Free Stand (STD-8000)