Instruction manual

SOFTWARE CONFIGURATION
107
8
8 SOFTWARE CONFIGURATION
Software configuration of your Matrix 400™ for static reading or simple code reading
applications can be accomplished by the Rapid Configuration procedure using the X-
PRESS™ HMI (which requires no external configuration program) or by using the VisiSet™
Setup Wizard for easy setup. These procedures are described in chapter 1.
For other application
s use VisiSet™, connecting to the reader through one of the serial ports.
NOTE
For Ethernet applications, connections to VisiSet™ can be made directly
through the Ethernet port of the reader (Ethernet models only), or QL500 or
BM2x0 Host Interface module. See the "Configuration Through Ethernet"
page in the VisiSet™ Help On-Line, or the "Matrix Family Setup Procedure
Using Programming Barcodes" document on the CD-ROM.
8.1 VISISET™ SYSTEM REQUIREMENTS
To install and run VisiSet™ you should have a Laptop or PC that meets or exceeds the
following:
 Pentium processor
 Windows: 98/2000, NT 4.0, XP, Vista or 7
 32 MB Ram
 5 MB free HD space
 one free RS232 serial port with 115 Kbaud
 Video Adapter (
1024 x 768) or better using more than 256 colors