Technical data

6 Magellan

8300/8400

Scale Zero Push Button

The Scale Zero Push Button is used for two functions as described in

Table 3. This button has no function on “scanner-only” models.

Table 3. Scale Zero Push Button Functions

EAS-Enabled Systems

Once the system is activated, EAS security tags are automatically deactivated by

passing items over the EAS antenna located beneath the scanner’s platter.

PRESS

DURATION

FUNCTION COMMENT

Momentary Zero Scale

When programmed to do so, the yellow Scale LED should be lit when no

weight is on the scale, indicating scale at zero. If it is not, press the

switch to zero the scale. The unit will sound a “click” upon pressing the

button.

4 Seconds

Scale Diag-

nostics Mode

This mode allows system support personnel to troubleshoot problems

with the scale. Cycle power to exit Scale Diagnostics Mode.

a. Diagnostics Mode is meant for use by trained systems support personnel. Users should not need to ini-

tiate this function under normal circumstances.

NOTE

Electronic Article Surveillance (EAS) systems are aftermarket options, and

are installed by either Sensormatic

or Checkpoint

technicians at your site

depending upon which EAS product package is purchased to use with your

scanner.