Operation Manual

2 Magellan
TM
8300/8400
Power Supply
The scanner may require either a Listed Class 2 or Listed LPS power
source which supplies power directly to the unit. It is sometimes pos-
sible for a scanner to receive power directly from the terminal
(P.O.T.). See the current product data sheet for more information
about P.O.T.
Scanning Items
Push or slide items through the 360° scan zone (shown here) in either a left-to-
right or right-to-left motion. The scanner has the ability to “see” a bar code
located on any side (left, right, front, back or bottom) of a product, so there’s
rarely a need to reorient an item in order to scan it.
For best scanning results...
• Move items through the scan zone in
their natural orientation. It’s not
necessary to reorient the bar code toward either the horizontal or vertical
scan window.
• Sliding or pushing items rather than picking
them up will avoid the
gripping, twisting and rotating movements that can cause repetitive
motion injuries to hands and wrists. The strain of lifting potentially
thousands of pounds per day can also be relieved using this technique.
Figure 2. Identifying the Scan Zone
Vertical Window
Scan Zone
Horizontal
Window
Scan Zone
Checker Side
Scan Zone
...indicate what the
scanner "sees."
Note that
eyes...
This figure is only an approximate
depiction of scan zone coverage
based on a medium-length model
of the scanner. For more details
about the scan zone, refer to the
Product Reference Guide (PRG).
Atención
Características de la
fuente de alimentación
eléctrica.
Entrada: 100 - 240 Vca
600mA 50/60 Hz
Salida: +12 VDC 1500mA.
(-) Negativo al centro
Utilice en su red solo fuentes certificadas
en Argentina.
El uso de fuentes de alimentación no
compatibles puede resultar en riesgo de
incendio o de choque eléctrico para el
usuario.