Operation Manual

Controls and Indicators
Product Reference Guide A-5
Scale Zero Push Button
The Scale Zero Push Button is used for multiple functions as listed in
Table A-3.
NOTE
The Scale Zero Push Button has no function in a “scanner
only” model.
The button must be configured to enable standard func-
tions, or Scale Diagnostics will not be an available feature.
Reference
Chapter 6, Scanner Button Options for program-
ming details.
Table A-3. Scale Zero Push Button Functions
PRESS
DURATION
FUNCTION COMMENT
Momentary Zero Scale
When programmed to do so, the yellow LED should be lit
when no weight is on the scale, indicating scale at zero. If it
is not, press the switch to zero the scale.
4 Seconds
Scale Diagnostics
Mode
a
This mode allows system support personnel to troubleshoot
problems with the scale. Momentarily press the Scale Zero
Push Button or cycle power to exit Scale Diagnostics Mode.
a. Diagnostics Mode is meant for use by trained systems support personnel. Users should not need to ini-
tiate this function under normal circumstances.