Operation Manual

Controls and Indicators
Product Reference Guide A-3
Volume/Tone Push Button
The Volume/Tone Push Button also performs multiple functions depend-
ing upon the duration of time it is pressed:
FRU Indica-
tion
Scanner (Green) LED flashes a
coded sequence in concert with
the speaker.
Occurs ONLY upon Volume/Tone button push
following a FRU warning. Enables service
technicians to identify FRU failures.
a. Certain functions of the Green and Yellow LEDs are selectable to be enabled or disabled. Your scanner
may not be programmed to display all indications.
Table A-1. Scanner and Scale LED Indications
LED
INDICATION
DURATION COMMENT
NOTE
The Volume/Tone Push Button must be configured to
enable standard functions, or the features described in
Table A-2 will not apply. Reference Chapter 6, Scanner But-
ton Options
for programming details.
Volume changes made using the Volume/Tone Push But-
ton are lost when the scanner is powered-down and are
reset to the factory default setting. If you wish to perma-
nently change the volume, use the special programming
labels in
Chapter 6, Good Read Beep Volume.
Table A-2. Volume/Tone Push Button Functions
PRESS
DURATION
FUNCTION COMMENT
Momentary (when
scanner is asleep)
Wakes scanner from
Sleep Mode
Alternatively, the scanner can be awakened by:
- Moving an object through the scan zone.
- A weight change on the scale.
- Scanning with an attached auxiliary scanner.