Operation Manual

2 Magellan
TM
800i
The Magellan 800i utilizes illumix™ intelligent illumination technology to
optimize light levels for a variety of bar code scanner functions including
automatic reading of bar codes from printed surfaces, mobile devices and
image capture in variable contrast environments.
Mounting the Scanner (Optional)
The scanner can be permanently attached to a wall or countertop as fol-
lows:
1. After identifying an optimal position for the scanner, cut out
and securely hold the screw hole template (located on the
inside back cover) in the desired position matching the scan-
ners footprint.
2. Mark the center of both screw locations using a pencil or
marker and remove the template.
3. If necessary, drill pilot holes in the marked positions, then
thread two pan head
1
, self-tapping screws in place, leaving
their heads protruding approximately 1/8” (3mm) above the
counter or wall surface.
4. Align the larger ends of the keyholes located on the scan-
ners bottom with the protruding screw heads, then push
down and rotate clockwise to lock the scanner in position.
1. The screw heads must fit inside the larger end of the key-
holes on the bottom of the scanner.