Operation Manual

182 Magellan
TM
3300HSi
microSD Card Removal
1. Push in gently using your finger or thumbnail to dis-
engage and remove the microSD card. Remember to
keep your finger in place atop the card’s edge to
avoid accidentally “launching” the card from the
springloaded slot.
2. Reconnect all cables which were disconnected earlier.
Autorun File Processing
After insertion of the card, the scanner will mount the
microSD card and search for the file “AUTORUN.DLS”. Embedded in that file is a validation pattern of the ASCII
strings “$START$” and “$END$” located at the respective starting and ending of the file.
If the validation pattern is found, the file may contain any of the following commands. The scanner will parse the
file taking action according to these commands. Filenames in italics specify a user-defined name.
Example AUTORUN.DLS file:
$START$ (required)
CONFIG,
FILENAME.TEX
DUMPSTATS, FILENAME.TXT
DUMPCFG, FILENAME.TEX
LOADSW, FILENAME.BIN
$END$ (required)
microSD Function Summary
The following table summarizes various functions of microSD card.
* Contact tech support for any available feature upgrade license.
FUNCTION
Image
Capture
Export
Status
Export
Configuration
Load
Applic
Load
Config
Load
CPLD
Code
Feature
Upgrade*
Direction
Scanner
 microSD
Card
 
microSD Card 
Scanner

Initiated by
Scanning a label

AUTORUN.DLS file in
microSD card

Scanner
microSD Card
Push down past
ush to seat,
then carefully
release
Seated card