Specifications

M-Series QuickStart Guide MX80 Status Lights

Page 11 Datalogic Automation, Inc.

MX80 Status Lights

This illustration shows the status lights on the front of the MX80 Processor.

M-Series Processor Serial Outputs

MX20 and MX40 Serial Cable

Symbol Name When lit indicates:

A Diagnostic Continuously: No physical storage connected

Blinking: No memory installed

B HDD Blinking: Solid-state hard drive is active

C Power Power is On

D PoE (4) Power over Ethernet (PoE) is active (M1xx camera only)

E PoE Activity/Link (4) On: Link is established

Blinking: Data is being transferred

F PoE Speed (4) Off: 10 Mbps

Green: 100 Mbps

Orange: 1000 Mbps (Gigabit)

G LAN 1 and 2 Speed Off: 10 Mbps

Green: 100 Mbps

Orange: 1000 Mbps (Gigabit)

H LAN 1 and 2 Activity/Link On: Link is established

Blinking: Data is being transferred

Pin Number Signal Name

1 Carrier Detect (CD)

2 Received Data (RxD)

3 Transmitted Data (TxD)

4 Data Terminal Ready (DTR)

5 Signal Ground (GND)

6 Data Set Ready (DSR)

7 Request To Send (RTS)