Instruction manual

Output Wiring M-Series Processor and Camera Guide
Datalogic Automation, Inc. 4-4
Output Wiring
The diagrams below show internal circuit diagrams and how to wire processor outputs.
General Purpose Output Circuit (Sinking)
NOTES: To prevent output damage, all inductive loads must have noise suppressors connected directly across the load, as
close to the load as possible.
The Output +5 to +35 VCC terminal is not an output voltage source. An external power source must be connected to it.
This is not an output voltage source. An
external power source must be con-
nected to VCC, as indicated.
Output +5 to +35 VCC is not an
output voltage source. An exter-
nal power source must be con-
nected to VDD, as indicated.