Instruction manual

SVS-Vistek Cameras M-Series Processor and Camera Guide
Datalogic Automation, Inc. 3-38
SVS-Vistek Cameras
SVS-Vistek Camera Connection
This camera uses two cables, one for Ethernet and one for power and trigger signals. For the Ether-
net connection, use cable 606-0677-xx.
To connect power and trigger signals, use a terminal block (248-0136) with the optional Hirose 12-
pin to HD-15 camera cable (606-0687-xx).
Model
(GigE - IP67)
Resolution
(Megapixels)
Color Image
Horizontal
Image Vertical FPS
(approx)
Minimum Software
Version Required
eco204MVGE
eco204CVGE
<1 No
Yes
1024 768 47 10.4.0
10.5.0
eco267MVGE
eco267CVGE
1.3 No
Yes
1360 1024 25 10.4.0
10.5.0
eco274MVGE
eco274CVGE
1.9 No
Yes
1600 1200 25 10.4.0
10.5.0
eco285MVGE
co285CVGE
1.3 No
Yes
1360 1024 34 10.4.0
10.5.0
eco414MVGE
eco414CVGE
<1 No
Yes
640 480 125 10.4.0
10.5.0
eco415MVGE
eco415CVGE
<1 No
Yes
782 494 86 10.4.0
10.5.0
eco424MVGE
eco424CVGE
<1 No
Yes
640 480 124 10.4.0
10.5.0
eco445MVGE
eco445CVGE
1.2 No
Yes
1280 960 30 10.4.0
10.5.0
eco618MVGE
eco618CVGE
<1 No
Yes
640 480 160 10.4.0
10.5.0
eco655MVGE
eco655CVGE
5No
Yes
2456 2048 10 10.4.0
10.5.0
Terminal Signal Name Notes
1 (Brown) Camera Power Min +10 VDC to Max +25 VDC
2 (Blue) Camera Ground
3 & 4 DO NOT USE Not Currently Supported
5 (Pink) Camera Trigger In 0 to +24 VDC
6 DO NOT USE Not Currently Supported
7(Black) Trigger Out to Strobe 0 to +24 VDC; 300 mA Max
8, 9, 10, 11, 12 DO NOT USE Not Currently Supported