Instruction manual

Disclaimer

Datalogic Automation Inc. makes no representations or warranties for merchantability or fitness for any particular pur-

pose, regarding Datalogic’s software or hardware. Datalogic Automation Inc. shall not be liable for errors contained

herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this publica-

tion or its contents.

Datalogic Automation, Inc. reserves the right to revise this publication from time to time and to make changes in the con-

tent hereof without obligation to notify any person of such revision or changes.

Under the copyright laws, neither this publication nor the software may be copied, photocopied, reproduced, or reduced to

any electronic medium or machine-readable form, in whole or in part, without the prior written consent of Datalogic

Automation Inc.

Impact, Vision Program Manager, VPM, Control Panel Manager, and CPM are trademarks of Datalogic Automation Inc.

Microsoft Windows is a trademark of Microsoft Corporation. Java is a trademark of Sun Microsystems, Inc. JAI is a

trademark of JAI A/S. Basler is a trademark of Basler AG. Dalsa is a trademark of Teledyne Dalsa.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A.

and the E.U.

CE Compliance

Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica-

tions. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be

required to correct the interference at the user’s own expense.

Technical Support

If you have technical questions about the operation of any Datalogic Automation Inc. product, contact your distributor or

Datalogic Automation Inc. Please have the following information available before you call:

• The version number of Impact Software Suite you are running. To find it, click the About icon in the main toolbar.

• The model and serial numbers of the devices you are using.

Telephone:

Facsimile:

Web site:

E-Mail:

952-996-9500

952-996-9501

http://www.datalogic.com

mvsupport@datalogic.com