Instruction manual

Processor Older I/O Terminal Block M-Series Processor and Camera Guide
Datalogic Automation, Inc. 6-28
Input Wiring
The diagrams below show two ways to wire a sensor to a general purpose or event input.
Note: All connections to inputs must be made using properly grounded shielded cable.
All inputs must be wired as either sinking or sourcing, they cannot be mixed. There is only one “Input Common” connec-
tion for all the inputs.
General Purpose Input Circuit (Sinking)
5
6
Input 9 +
Input 11 +
7
8
Input 13 +
Input 15 +
9 Input Common
20
21
Input 2 and Event 2 +
Input 4 +
22
23
Input 6 +
Input 8 +
24
25
Input 10 +
Input 12 +
26
27
Input 14 +
Input 16 +
Connector and
terminal number
Signal Name