Instruction manual

M-Series Processor and Camera Guide JAI Cameras (Older Terminal Blocks)
6-17 Datalogic Automation, Inc.
NOTE 1: Pins 2 and 11 are tied together inside of the camera. Pins 1 and 12 are tied together inside of the camera. To
avoid a voltage drop when there are long wires between your power supply and the camera, we recommend that you pro-
vide camera power VCC through separate wires between your power supply and pins 2 and 11 on the camera, and that you
provide camera power ground through separate wires between your power supply and pins 1and 12 on the camera.
JAI Camera Circuit Diagrams (Older Terminal
Blocks)
JAI Camera Trigger Input circuit (sourcing)
JAI Camera Trigger Input circuit (sinking)
JAI Camera Strobe Output circuit
Sinking
Sourcing