Instruction manual

M-Series Processor and Camera Guide M5xx Camera Connection (Older Terminal Blocks)
6-11 Datalogic Automation, Inc.
NOTE 2: To help prevent ground loops and possible false triggering, we recommend connecting pin 5 on the Trigger
Input (Camera Trigger Ground) to the ground on the Camera Power supply cable (pins 5 and/or 6).
8 Blu/Wht Input 2 Ground No Connection
9 Org/Wht Input 2 Plus Single Line Trigger
OR
Phase A Line Trigger (Quadrature Encoder)
Off: 0 to + 0.8 VDC
On: +2.0 to +5 VDC
Maximum: +5 VDC
10 Grn/Wht Not Connected
11 Red/Blu DO NOT USE
12 Blu/Red DO NOT USE
Table 2: Trigger Input Connections
Terminal Color Signal Name Notes