Quick Start Guide

ManualsBrandsDatalogic ManualsVideoLynx

SYNCHRONIZE YOUR DEVICE WITH THE PC

Set up Synchronization using Windows Mobile®

Device Center

Windows Mobile Device Center is only compatible with Windows

Vista and Windows 7; if you run Windows XP or earlier, you have

to download Microsoft ActiveSync.

You can establish a connection to your Lynx through the

following interfaces:

 USB either directly or through the Single Dock

 RS232 either directly (through the Datalogic 94A051972

HandyLink™ cable) or through the Single Dock

 Bluetooth®

To establish a partnership between the Lynx and a host PC, start

Windows Mobile® Device Center and follow the steps below:

1. Connect the Lynx to the host PC. Windows Mobile® Device

Center configures itself and then opens.

2. On the license agreement screen, click Accept.

3. On the Windows Mobile Device Center’s Home screen,

click Set up your device.

4. Select the information types that you want to synchronize,

then click Next.

5. Enter a device name and click Set Up.

When you finish the setup wizard, Windows Mobile Device

Center synchronizes the PDA automatically. Microsoft® Office

Outlook® emails and other information will appear on your device

after synchronization.

Communicate with Host

Insert the HandyLink™ cable output plug into the

HandyLink™ connector of the Lynx, making sure that

both the arrows on the connector and the Lynx face

upwards:

NOTE

INSTALLING A MICROSD CARD

1. Turn off the Lynx and shift the battery latch to the left and

remove the battery pack:

2. Open the card slot and insert the microSD card with the

written part downward

3. Shift the microSD card to the right to lock it into the

cardholder; close the card slot:

INSTALLING A SIM CARD

1. Turn off the Lynx and shift the battery latch to the left and

remove the battery pack:

2. Insert the SIM card with the contacts downwards:

SCANNING AND IMAGING

Laser Data Capture

Imager Data Capture

Linear barcode 2D Matrix symbol

ÌBX3ÉÎ

Relative Size and Location of Aiming System Pattern

REFERENCE DOCUMENTATION

For further information regarding Lynx refer to the SDK Help on-Line

and to the Lynx User’s Manual.

For information regarding safety and regulatory refer to the Safety

and Regulatory Addendum or to the dedicated section of the Lynx

User’s Manual.

PATENTS

This product is covered by one or more of the following patents:

Design Pat.: EP 1711946; US D633502; CN ZL201030189483.7.

Utility Patents: EP681257.

Additional patents pending.

SERVICE AND SUPPORT

Datalogic provides several services as well as technical support

through its website.

Please check our website at www.datalogic.com under “Support

& Services”, then “Automatic Data Capture”, and click on the

links indicated for further information including:

- Downloads

- Manuals for the latest versions of user manuals and

product guides.

- Software & Utilities for the latest firmware release for

your product. You can also click on the following link for

direct access to this section:

www.datalogic.com/products_updates.

- Service Program for warranty extensions and maintenance

agreements.

- Repair Centers for a list of authorised repair centers.

- Technical Support Automatic Data Capture email form to

contact our technical support.

WARRANTY TERMS AND CONDITIONS

The warranty period is 1 year for the device and 90 days for

consumables (e.g. battery, power supply, cable etc.) from date of

purchase at our company.

Protected to the fullest extent under U.S. and international laws. •

Copying, or altering of this document is prohibited without express written

consent from Datalogic ADC S.r.l.

Datalogic and the Datalogic logo are registered trademarks of Datalogic

S.p.A. in many countries, including the U.S.A. and the E.U.

Lynx and the Lynx logo are trademarks of Datalogic ADC S.r.l.

All other brand and product names mentioned herein are for identification

purposes only and may be trademarks or registered trademarks of their

respective owners.