Installation manual

DS4600A
2
1
1.2 DESCRIPTION
Some of the main features of this scanner are given below:
• long-range reading
• scanning speed 800 scans/sec
• completely configurable from host computer
• 2 serial communication interfaces
• reads most popular codes
• supply voltage from 10 to 30 Vdc
• test mode to verify the reading features and exact positioning of the scanner
without the need for external tools
• configurable in different operating modes to suit the most various barcode reading
system requirements
• code verifier
• possibility to detect the position of the label in the scan line
The DS4600A scanner uses a solid state laser diode as a light source; the light
emitted has a wavelength between 630 and 680 nm. Refer to the section "Safety
Precautions" at the beginning of this manual for information on laser safety.
The reader is contained in a rugged aluminum housing; the mechanical dimensions
are 101 x 83.5 x 42 mm and it weighs about 615 g.
The protection class of the enclosure is IP65, therefore the reader is particularly
suitable for industrial environments where high protection against harsh external
conditions is required.