User Manual

Product Reference Guide 273
Appendix B
Standard Defaults
The most common configuration settings are listed in the “Default” column of the table below.
Page references are also provided for feature descriptions and programming bar codes for each
parameter. A column has also been provided for recording of your preferred default settings for
these same configurable features.
Table 25. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 21
USB Suspend Mode
Disable 22
RS-232 ONLY
Baud Rate
9600 23
Data Bits
8 Data Bits 24
Stop Bits
1 Stop Bit 25
Parity
None 25
Handshaking Control
RTS 27
RS-232/USB-COM
Intercharacter Delay
No Delay 30
Beep On ASCII BEL
Disable 31
Beep On Not on File
Enable 31
ACK NAK Options
Disable 32
ACK Character
‘ACK’ 33
NAK Character
‘NAK’ 33
ACK NAK Timeout Value
200 ms 34
ACK NAK Retry Count
3 Retries 35
ACK NAK Error Handling
Ignore Errors Detected 36
Indicate Transmission Failure
Enable 37
Disable Character
‘D’ 37