User Manual

Product Reference Guide 19
Chapter 3
Configuration Using Bar Codes
This and following sections provide programming bar codes to configure your
scanner by changing the default settings. For details about additional methods
of programming, see "
Customizing Configuration Settings" on page 16 .
NOTE
You must first enable your scanner to rea
d bar codes in order to
use this section. If you have not done this, go to
Setup, starting on
page 5 and complete the appropriate procedure.
Configuration Parameters
Once the scanner is set up, you can change the default parameters to meet your
application needs. Refer to "
Resetting the Product Configuration to Defaults" on page
18
for initial configuration in order to set the default values and select the
interface for your application.
The following configuration parameters are divided into logical groups, making
it
easy to find the desired function based on its reference group.
Interface Configuration:
• "RS-232 ONLY Interface" on page 23
• "RS-232/USB-COM Interfaces" on page 29
• "Keyboard Interface" on page 39
• "USB-OEM Interface" on page 71
Parameters common to all interface applications:
• " Global Prefix/Suffix" on page 74
• "
Data Format" on page 73 offers advanced configuration options for custom-
ization of scanned data output.
• "
Reading Parameters" on page 85 control various operating modes and indi-
cators status functioning.
Symbology-specific parameters:
"1D Symbologies" on page 113 defines options for all symbologies and provides
the programming bar codes necessary for configuring these features.
NOTE
You must first enable your scanner to read bar codes in order to
use this section. If you have not done this, go to
Setup, starting on
page 5 and complete the appropriate procedure.