User Manual

Enter/Exit Programming Mode Code 93

194 Heron™ HD3430

Code 93 Set Length 2

This feature specifies one of the bar code lengths for Code 93 Length Control

on page 192. Length 2 is the maximum label length if in Variable Length on

page 192 Mode, or the second fixed length if in Fixed Length on

page 192

Mode. Length includes the bar code’s chec

k, data, and full-ASCII shift charac-

ters. The length does not include start/stop characters.

The length can be set from 1 to 50 characters. A setting of 00 specifies to

nore this length (only one fixed length). See "Set Length 2" on

page 262 for

more detailed programming instructions.

Select Code 93 Length 2 Setting

To configure this feature, scan the ENTER/EXIT bar code

above, then the bar code at left followed by digits from

the Alphanumeric characters in

Appendix D, Key-

pad

representing your desired character(s). End by

scanning the ENTER/EXIT bar code again.

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters

$CC9L2