Specifications

GWY-01-DNT-01 MANUAL – REV. 02 CHAPTER 5:
DEVICENET INTERFACE
PAGE 47 OF 67
5.2.2 Configuring Gateway and PLC DeviceNet
Communications
After importing the .EDS file and rebooting the host computer (or after restarting your
Rockwell Automation software), follow the steps below to continue configuring
DeviceNet network communications between the Gateway and a ControlLogix PLC.
1 On the host computer, start RSNetWorx for DeviceNet.
2 Go online (click NETWORK and select ONLINE).
Figure 5-1: Configuring Gateway for DeviceNet - Going Online
3 Select the appropriate
DeviceNet network and
then click “OK.”