Specifications

46 Gryphon™ D432/D412Plus
Enter Reader Configuration Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
WEDGE INTERFACE
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
SET CUSTOM EXTENDED HEADER/TERMINATOR KEYS
The extended Header/Terminator keys for Wedge Interface users can be customized by
defining them through a simple keyboard setting procedure.
For example, the Numeric Keypad keys can be set for use as Headers or Terminators by
subst
ituting the default extended keys during this procedure.
Press and release a key to set it.
Some characters may require more than one key pressed simultaneously during
normal use
(refer to the manual of your PC or terminal for keyboard use). The exact sequence must be
indicated to the reader in this case pressing and releasing the different keys.
Example
If one has to press the "Shift" and "4" keys simultaneous
ly on the keyboard to transmit the
character "$" to the video, to set the "$", press and release "Shift" then press and release "4".
Each pressed and released key must generate an acoustic signal on the r
eader, otherwise repress
the key. Never press more than one key at the same time, even if this corresponds to the normal
use of your keyboard.
Press "Backspace" to correct a wrong key entry. I
n this case the reader emits a wrong beep.
Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard setting
pr
ocedure. "SHIFT" must be repressed for each character and cannot be substituted by
"CAPS LOCK".
1. Read the "Set Extended Keys" code.
2. Press the first 4 keys indicated in Table 4 on page 47.
3. Define all keys from 5 to 28 in the following table.
If the first 4 KEYS (Shift, Alt, Ctrl, and Backspace) ar
e not available on your keyboard,
you can only substitute them with keys not used, or substitute them with each other.
The reader signals the end of the procedure with
3 beeps, indicating the keys have been
registered.
Set Extended Keys
AOCOBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAHEIK
AKCBPJCJGIIJCMCEGJMDPHOPJK
AEFBJLBGMHPKNMHNBGHNEDDEGK
AAPHBAJJCBCBJNFHFHFBFPJNHK
AFLFAOPHBFNMIOAIIIOEMAEJLK
DLLLLLLDDDLLLLLDLDDDDLDLLL