Specifications

Default Settings

Product Reference Guide 27

Data Format-Symbology Independent Parameters

Code Identifier Disabled

Custom Code Identifier Disabled

Code Length Disabled

*Header No headers

*Terminator

CR and LF terminators for RS-232, USB BULK, USB COM, USB

neric HID

ENTER terminator for Wedge, USB Kbd

Data Format-Symbology Dependent Parameters

Symbology Specific Format Select All

Header Symbology No headers

Terminator Symbology No terminators

Symbology Character Substitution No character to substitute

Symbology Character Deletion No character to delete

Data Format-Concatenation

Concatenation Disabled

Define Concatenation 2 EAN/UPC codes concatenated

Set First Concatenated Code Length 000 = any length

Set Second Concatenated Code Length 000 = any length

Set Third Concatenated Code Length 000 = any length

Set Fourth Concatenated Code Length 000 = any length

Concatenation with Intercode Delay Disabled

Concatenation Timeout 10 seconds

Concatenation Failure Transmission Tx codes causing failure

Transmission after Timeout No code transmission

Concatenation Result Code ID No code Identifier

Advanced Formatting

Format enable/disable Disabled

Camera Control

Exposure Mode Automatic, based on entire image

Power Save

Illumination System Power ON

Code Selection

Issue Identical Codes Enabled

EAN/UPC

Selection Enabled

Add-On Disabled

UPCE Expansion Disabled

Code 39

Selection Enabled - no check digit

Code 39 Full ASCII Disabled

Code Length Check

Disabled

Configuration Field Default Setting