Specifications

Product Reference Guide 19
Chapter 3
Initial Setup
This procedure allows setting up the reader to operate with the default settings. Whenever you
need to change the default values refer to "Changing Default Settings" on page 30.
RS-232 Interface Selection
The Gryphon D432/D412Plus reader requires the RS-232 interface cable and the AC/DC
power adapter to be connected.
To install and configure your reader with the RS-232
interface, follow these instructions:
1. Make all system connections as shown:
2. Read the restore default parameter code below:
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
3. Read the RS-232 interface selection code:
RS-232
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFEHFKK
AMGNPJCJGIIJCMCEGJMHNDOLLK
AIFBJLBGMHPLNKECPCGMBBIBOK
AAPHBAJJDAAGMGKDDAOHBGGLHK
AEKFBONJCDDIECLFJIJKMCHLIK
DLDDLDLDLLDLLLLDLLDDDLDLLL
4. Power up your PC.
RS-232 is the default interface set at the factory.