Specifications

References
114 Gryphon™ D432/D412Plus
Code Selection
Issue Identical Codes
This parameter manages the code transmission when more than one code containing the same
information is detected in a single scan.
All identical codes are transmitted to the Host when the parameter is enabled; if disabled, only
one of the identical
codes is sent.
Reading Parameters
Safety Time
Safety time prevents the device from immediately decoding the same code more than once. A
timeout can be set up to 9.9 seconds before the decoder will accept the same code. Reading is
immediate if the code changes.
The safety time parameter is not applicable
when all codes per scan is enabled or when setting
one read per cycle in normal (hardware) trigger operating mode.
Configuration Editing Commands
The following commands carry out their specific function and do not require reading the Enter
or Exit and Save Configuration codes.
Command Description
Restore Gryphon D432/D412Plus reader default configuration.
Transmit the Gryphon D432/D412Plus reader Software release.
Transmit the Gryphon D432/D412Plus curr
ent configuration in
ASCII format to Host.
Transmit the Gryphon D432/D412Plus current data format con-
figuration in ASCII format to Host.
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
AMHKGPBOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECBEIK
AKCBPJCJGIIJCMCEGNOKAKPHJK
AEFBJLBGMHPKMKEPKAKIOABEGK
AAPHBAJICFGFIBIPPOECDKIJBK
AFKFBMIKBFKGOMKNNGLKGNNIKK
DLLDLDLLDDLLLLLDDLDDDLDLLL
AMHOGPBOFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCEGNLFCLIPJK
AEFBJLBGMHPKMKFLEFBNBOKHGK
AAPHBAJIDGHLDGOMCOHJGAAFDK
AGKFALIMCNPOKGIEIBDIOGHIKK
DLLLLLLLDDDLLLLDLLLDDLDLDL
AMHOHMEMHNGNENEIEPANHOGOCK
AHPBIBAMDKEOFMHMLJALFHGFJK
AKCBPJCJGIIJCMCEHJIPFPFLNK
AEFBJLBGMHPLNOBPKFGHKGAGGK
AAPHBAJIDBEDNCGFJDBLCCBHFK
AELFAJJEFKLIMPLCLLEIOMIJLK
DDDLLLLDLDLLLLLDDDLDDLDLDL