Australia Japan Datalogic Scanning Pty Ltd North Ryde, Australia Telephone: [61] (2) 9870 3200 Fax: [61] (2) 9878 8688 Datalogic Scanning KK Shinagawa, Tokyo, Japan Telephone: 81 (0)3 3491 6761 Fax: 81 (0)3 3491 6656 France and Benelux Latin America Datalogic Scanning Sarl LES ULIS Cedex, France Telephone: [33].01.64.86.71.00 Fax: [33].01.64 46.72.
Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”).
CONTENTS Updates and Language Availability.....................................................................iv Gryphon™ D432/D432E Description .................................................................. 1 Using Gryphon™ D432/D432E ........................................................................... 2 Indicators............................................................................................................. 4 Setup.................................................................
UPDATES AND LANGUAGE AVAILABILITY UK/US The latest drivers and documentation updates for this product are available on Internet. Log on to: www.scanning.datalogic.com I Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Questo manuale è disponibile anche nella versione italiana. Collegarsi a: www.scanning.datalogic.com F Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur Internet.
GRYPHON™ D432/D432E GRYPHON™ D432/D432E DESCRIPTION The Gryphon™ D432/D432E reader is an omni-directional barcode scanner having the following characteristics: Plug and Play The Gryphon™ D432/D432E is very ergonomic and userfriendly for intuitive operation and is equipped with plugand-play enhanced Multistandard Architecture. It can be connected to a Host PC through a USB, RS232 or Wedge emulation cable.
DATALOGIC USING GRYPHON™ D432/D432E Gryphon™ D432/D432E normally functions by capturing and decoding codes. The Gryphon™ D432/D432E reader uses an intelligent aiming system. By pulling the trigger, the aiming system indicates a field of view, which should be positioned over the code: Aiming System When you pull the trigger a red beam illuminates the code. If the aiming system is centered and the entire symbology is within the aiming system, you will get a good read.
GRYPHON™ D432/D432E NOTE NOTE The Gryphon™ D432/D432E hand-held reader aiming system is designed for general reading and decoding of 1D and 2D symbols. Some variation in reading distance will occur due to narrow bar width and other factors. If reading codes positioned on reflective surfaces, it may be necessary to tilt the reader with respect to the barcode and/or set the Camera Control parameters.
DATALOGIC INDICATORS LED INDICATORS The Gryphon™ D432/D432E has one green LED indicator signaling the following reader functions: STATUS BEHAVIOR Power ON The LED lights up for 2 seconds to signal the power supply is present. Power ON with USB (without The LED blinks until the Host accepts the external power supply) device. Normal Function The LED lights up after a good decoding and will switch off only at the next trigger press.
GRYPHON™ D432/D432E CONNECTIONS RS232 WEDGE USB The Gryphon™ D432/D432E reader requires the USB interface cable (CAB412).
DATALOGIC DISCONNECTING THE CABLE USB INTERFACE CONFIGURATION The USB interface is compatible with: Windows 98 (and later) IBM POS for Windows Mac OS 8.0 (and later) 4690 Operating System START-UP As with all USB devices, upon connection, the Host performs several checks by communicating with the Gryphon™ D432/D432E. During this phase the green LED on the Gryphon™ D432/D432E reader blinks and normal operations are suspended.
GRYPHON™ D432/D432E from the O.S. (if requested). When configuring the USB-COM interface, the relevant files and drivers must be installed from the USB Device Installation software, which can be downloaded from the web site http://www.scanning.datalogic.com. The reader is ready.
DATALOGIC INTERFACE SELECTION RS232 WEDGE – IBM AT AMHKHMFOHNGNENEIEPANHOGOCK AGPEPJAMDKEOFMHMLJAKFEHFKK AMGNPJCJGIIJCMCEGJMHNDOLLK AIFBJLBGMHPLNKECPCGMBBIBOK AAPHBAJJDAAGMGKDDAOHBGGLHK AEKFBONJCDDIECLFJIJKMCHLIK DLDDLDLDLLDLLLLDLLDDDLDLLL AMHKHMFOHNGNENEIEPANHOGOCK AGPEPJAMDKEOFMHMLJALFAEHKK AEONPJCJGIIJCMCEHPLLHLPPJK AIFBJLBGMHPLNPDFHGDGFIBDOK AAPHBAJJCGCOPJDIMBCEANODDK AFKFBPPJPJCAALOIKIECIPIKLK DDLDLDLDDLDLLLLDDDDDDLDLDL USB BULK USB KB EMULATION AMHKHMFOHNGNENEIEPANHOGOCK AGPEPJAMDKEOFMHMLJAKFDD
GRYPHON™ D432/D432E WEDGE KEYBOARD NATIONALITY This parameter default value is restored through the Interface Selection code and not through the Restore Default code. Select one of the following keyboard nationality codes.
DATALOGIC USB KEYBOARD NATIONALITY This parameter default value is restored through the Interface Selection code and not through the Restore Default code. Select one of the following keyboard nationality codes.
GRYPHON™ D432/D432E READING PARAMETERS AIMING SYSTEM DELAY Point the reader at the target and pull the trigger to enable the aiming system and the illuminator (red beam) to capture and decode the image. The aiming system will briefly switch off during the acquisition time and if no code is decoded will switch on again before the next acquisition. The illuminator will remain on until the symbol is decoded. As you are reading code symbols, adjust the distance at which you are holding the reader.
DATALOGIC DEFAULT CONFIGURATION RS232 Standard DEFAULT SETTINGS 115200 baud, no parity, 8 data bits, 1 stop bit, no handshake, no protocol, FIFO enabled, intercharacter delay = 0, intercode delay = 0 USB COM Emulation DEFAULT SETTINGS no handshake, no protocol, FIFO enabled, intercharacter delay = 0, intercode delay = 0 USB Keyboard Emulation DEFAULT SETTINGS USA keyboard*, intercharacter delay = 0, intercode delay = 0, FIFO enabled, keyboard speed = normal WEDGE Communication DEFAULT SETTINGS USA keyboard
GRYPHON™ D432/D432E CODE SELECTION issue identical codes = enable enabled codes Standard Code 39: no check digit control, variable code length; EAN 8/EAN 13 / UPC A/UPC E without ADD ON: UPCE expansion disabled Interleaved 2/5: check digit control and transmission, variable code length Code 128: variable code length PDF417 Datamatrix: rectangular, normal and inverted, variable code length QR disabled codes Code 32, Codabar, Code 93, EAN 128, RSS, Micro PDF417, Postal Codes, Maxicode, Composite Codes.
DATALOGIC OPERATING TEST EAN-13 Code 39 (Standard) 1 234567 000992 Code 128 t e s QR 14 1 7 1 6 2 PDF417 t Data Matrix (Normal)
GRYPHON™ D432/D432E TECHNICAL FEATURES Gryphon™ D432/D432E Common Features Electrical Features Operating Voltage 4.75 to 5.25 V Power Consumption @ 5V (Stand-by) 120 mA @ 5V (Typical) 245 mA @ 4.
DATALOGIC Gryphon™ D432 Optical Features Focus distance Field of view Horizontal field of view at distance (d) in mm Vertical field of view at distance (d) in mm Max Resolution Depth of field* 1D (linear): Code39 EAN13 2D: POSTNET PDF417 115 mm 21.8° (H) x 16.7° (V) 0.4d + 12 0.3d + 9 Linear codes - mm (mils) 0.10 (4) X-dimension mm (mils) 0.13 (5) Symbol size cm (in) 1.2 (0.47) 0.5 (20) 3.2 (1.26) 0.33 (13) 3.1 (1.22) X-dimension mm (mils) 0.5 (20) Symbol size cm (in) 4.0 x 0.4 (1.57 x 0.16) 1.
GRYPHON™ D432/D432E Gryphon™ D432E Optical Features Focus distance Field of view Horizontal field of view at distance (d) in mm Vertical field of view at distance (d) in mm Max Resolution 65 mm 20° (H) x 15° (V) 0.32d + 8.67 0.24d + 6.50 Linear codes - mm (mils) 0.05 (2.0) Datamatrix – mm (mils) 0.10 (4.0) Depth of field* 1D (linear): Code39 X-dimension mm (mils) 0.076 (3) 0.13 (5) 2D: PDF417 X-dimension mm (mils) 0.76 (3) 0.25 (10) QR 0.13 (5) DataMatrix 0.13 (5) 0.
DATALOGIC SERVICES AND SUPPORT Datalogic provides several services as well as technical support through its website. Log on to www.scanning.datalogic.com and click on the links indicated for further information including: • PRODUCTS Search through the links to arrive at your product page where you can download specific Manuals and Software & Utilities.
GRYPHON™ D432/D432E COMPLIANCE Aiming System Laser Beam Output Window FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation.
DATALOGIC LASER SAFETY The Gryphon™ D432/D432E hand-held reader is a Class 1 LED product regarding its Illuminator and a Class 2 laser product regarding its Aiming System. LED Illuminator The use of an illuminator in the Gryphon™ D432/D432E hand-held reader is a Class 1 LED product: ILLUMINATORE LED CLASSE 1 AUSLEUCHTER LED KLASSE 1 ILLUMINATEUR A LED DE CLASSE 1 ILUMINADOR LED DE CLASE 1 Aiming System The Gryphon™ D432/D432E aiming system meets the Class 2 requirements for laser safety.
GRYPHON™ D432/D432E I D F E LA LUCE LASER È VISIBILE ALL'OCCHIO UMANO E VIENE EMESSA DALLA FINESTRA INDICATA NELLA FIGURA. DIE LASERSTRAHLUNG IST FÜR DAS MENSCHLICHE AUGE SICHTBAR UND WIRD AM STRAHLAUS TRITTSFENSTER AUSGESENDET (SIEHE BILD) LE RAYON LASER EST VISIBLE À L'OEIL NU ET IL EST ÉMIS PAR LA FENÊTRE DÉSIGNÉE SUR L'ILLUSTRATION DANS LA FIGURE A LUZ LÁSER ES VISIBLE AL OJO HUMANO Y ES EMITIDA POR LA VENTANA INDICADA EN LA FIGURA.
DATALOGIC ITALIANO Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e si riferiscono all’uso corretto del terminale. NORMATIVE STANDARD PER LA SICUREZZA LASER Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data di produzione: CDRH 21 CFR 1040 e EN 60825-1. Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo o manutenzione.
GRYPHON™ D432/D432E FRANÇAIS Les informations suivantes sont fournies selon les règles fixées par les autorités internationales et se réfèrent à une correcte utilisation du terminal. NORMES DE SECURITE LASER Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de fabrication: CDRH 21 CFR 1040 et EN 60825-1. Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.
DATALOGIC The Gryphon™ D432/D432E Hand-Held Reader is not user-serviceable. Opening the case of the unit can cause internal damage and will void the warranty. CAUTION POWER SUPPLY This device is intended to be connected to a UL Listed/CSA Certified computer which supplies power directly to the reader or else be supplied by a UL Listed/CSA Certified Power Unit marked "Class 2" or LPS power source rated 5 V, minimum 330 mA, which supplies power directly to the reader via the power connector of the cable.
Datalogic Scanning, Inc.
Australia Japan Datalogic Scanning Pty Ltd North Ryde, Australia Telephone: [61] (2) 9870 3200 Fax: [61] (2) 9878 8688 Datalogic Scanning KK Shinagawa, Tokyo, Japan Telephone: 81 (0)3 3491 6761 Fax: 81 (0)3 3491 6656 France and Benelux Latin America Datalogic Scanning Sarl LES ULIS Cedex, France Telephone: [33].01.64.86.71.00 Fax: [33].01.64 46.72.