Specifications

ENTER/EXIT PROGRAMMING MODE Code 11 Set Length 1

Product Reference Guide 215

Code 11 Set Length 1

This feature specifies one of the barcode lengths for Code 11 Length Control. Length 1 is the

minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length

Mode. Length includes the barcode’s check and data characte

rs. The length can be set from 2 to

50 characters.

Table 18 provides some examples for setting Length 1. See page 302 for detailed instructions on

setting this feature.

Table 18. Code 11 Length 1 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (pad with

leading zer

oes)

02 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 11 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘2’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Code 11 Set Length 1 Setting

Make a mistake? Scan the CANCEL barcode to abort and not

save the en

try string. You can then start again at the begin-

ning.

CANCEL

DEFAULT

04 = Length 1 is 4 Characters