Operation Manual

READING PARAMETERS PARAMETERS
Description Parameter Value
Illumination Mode Disabled SPIL 00
Triggered 01
Enabled 02
Operating Modes On Line SNRM 00
Serial On Line 01
Automatic 02
Automatic (Object Sense) 03
Test Mode 04
Test Mode Multiple Disabled SNTM 00
Enabled 01
Automatic Threshold From 2 to 255 scans without a code SNAT g
Phase Off Event Trigger Stop SNTO 00
Timeout 01
Trigger Stop-Timeout 02
Timeout From 40 to 5100 ms SNET h
Serial Start Any string of characters (max 20) between 00-FE STON i
Serial Stop Any string of characters (max 20) between 00-FE STOF i
Label Programming Mode Disabled FAPM 00
Enabled 01
Exposure Mode Continuous SPST 00
Strobed SPST 01
Software Configuration Strings
214 Gryphon™ I GFS4170/GFS4150-9
g = Hex value from 02 to FF representing the number of scans without a code
h = Hex value from 02 to FF repres
enting the decimal number (x20 ms)
i = Hex value
from 00 to FE representing the ASCII character